Electrolux RE135B92 Instruction Manual
Quick Links
BL115B92
BL11T92
FL12597
H11T92
HURRICANE 12.5SD
LZ1397AK
M115T92
M135B92
MBA14597K
MBA16107K
MC11T92
MJ135B92
MJ15B97
P1197
Instruction manual
Please read these instructions care-
ful ly and make sure you un der stand
them before using this ma chine.
Anleitungshandbuch
Bitte lesen Sie diese Anleitungen sorg-
fältig durch und vergewissern Sie sich,
daß Sie diese verstehen, bevor Sie die
Maschine in Betrieb nehmen.
Manuel d'instructions
Merci de lire trés attentivement le
manuel d'instructions. Assurez-vous
d'avoir tout compris avant d'utiliser ce
tracteur.
Manual de las instrucciones
Por favor lea cuidadosamente y com-
prenda estas intrucciones antes
de usar esta maquina.
P11597
P12107
P12592
P12597
P12597K
P135107
PF135B92
RE125T92
RE135B92
REB12597K
REN11597
REN12597
UN135B92
UN15597SBK
02478
Manuale di istruzioni
Prima di utilizzare la macchina leggete
queste istruzioni con attenzione ed ac-
certatevi di averle comprese bene.
Instructieboekje
Lees deze instructies aandachtig en
zorg dat u ze begrijpt voordat u deze
machine gebruikt.
Related Manuals for Electrolux RE135B92
Summarization of Contents
Safety Rules and Precautions
User Precautions
Read all instructions, avoid mowing near people, do not transport passengers, and be attentive.
Preparation for Use
Inspect for debris, wear proper footwear, remove objects from lawn, handle fuel safely outdoors.
Operating Guidelines
Operate only in daylight, ensure blades are disengaged, avoid steep slopes, drive carefully on slopes.
Assembly Instructions
Steering Wheel Assembly
Mount extension shaft, main shaft cover, steering wheel adapter, and secure with washer and bolt.
Seat Installation
Remove seat hardware, attach seat to pan, adjust position, and tighten securely.
Functional Description of Controls
Control Layout
Identifies the location of key controls including light switch, throttle, brake, gear shift, and cutting unit controls.
Light Switch and Throttle Control
Explains the function of the light switch and how the throttle controls engine speed and blade rotation.
Brake and Clutch Pedal Operation
Describes how the brake/clutch pedal applies the brake and disengages the motor simultaneously.
Gear Shift Lever
Details the forward, neutral, and reverse positions and safe shifting procedures.
Cutting Unit Engagement
Explains how to connect and disconnect the cutting unit drive.
Cutting Unit Lift/Lower
Describes the lever operation for raising and lowering the cutting unit.
Ignition Lock Operation
Explains the different key positions (OFF, ROS ON, ON, START) for ignition and engine control.
Parking Brake Engagement
Details the procedure for engaging and releasing the parking brake.
Choke Control
Explains how to use the choke control for starting a cold engine.
Before Starting Procedures
Fueling Instructions
Use unleaded petrol, do not overfill, ensure cap is tight, and handle fuel safely outdoors.
Oil Level Check
Check engine oil level before each run, ensure machine is horizontal, and use correct oil type.
Tire Air Pressure
Regularly check tire pressure; specify front and rear tire pressures.
Operating the Tractor
Starting the Engine
Ensure cutting unit is in transport position, disengage cutting unit, set gear lever to neutral.
Choke and Throttle Adjustment
Use choke for cold start, adjust throttle for desired engine speed.
Brake/Clutch Pedal Operation
Press brake/clutch pedal fully, then release slowly.
Gear Shifting
Shift gears correctly, stop before changing direction, and never force the lever.
Reverse Operation System (ROS)
Understand and use the ROS system safely for repositioning with attachment engaged.
Cutting Tips
Clear lawn, adjust cutting height, mow often, avoid wet grass, and clean deck after use.
Slope Operation Warnings
Do not drive on slopes exceeding 5°, avoid parallel driving, and never stop/start on a slope.
Driving Techniques
Drive in right turns, use left side for close cutting, and change direction on large lawns.
Switching Off the Engine
Disconnect cutting unit, move throttle to idle, lift unit, turn key to STOP.
Maintenance and Adjustments
Pre-Maintenance Safety
Disconnect spark plug, press brake, set neutral gear, disengage blades, and switch off engine.
Engine Hood Maintenance
How to raise, unsnap, remove, reinstall, and close the engine hood.
General Maintenance Procedures
Periodic maintenance, cleaning, checking bolts, battery, air screen, and brake operation.
Engine Servicing
Refer to engine manual, service oil drain valve, and clean engine components.
Maintenance Schedule
Provides a schedule for routine maintenance tasks based on hours or necessity.
Operator Presence and ROS System Checks
Verify operator presence and Reverse Operation System functions for safety.
Blade Maintenance and Replacement
Keep blades sharp, replace damaged blades, and ensure equal sharpening to avoid imbalance.
Brake Adjustment
Locate brakes, dismantle wheel if needed, and adjust brake lever distance.
Cutting Unit Dismantling
Step-by-step guide to safely remove the cutting unit from the tractor.
Drive Belt Replacement
Procedure for removing and installing the drive belt for the cutting unit.
Cutting Unit Assembly
Instructions for installing the cutting unit onto the tractor.
Cutting Unit Adjustment
Adjust cutting unit direction of travel and side-to-side alignment.
Troubleshooting Guide
Engine Won't Start
Check fuel, spark plug, wiring, carburetor, and fuel lines for issues.
Starter Not Engaging
Troubleshoot battery, cable contacts, clutch lever, fuse, ignition switch, and safety switch.
Engine Runs Irregularly
Check gear selection, spark plug, carburetor, air filter, fuel tank vent, and ignition timing.
Engine Lacks Power
Inspect air filter, spark plug, fuel system, and carburetor for problems.
Engine Overheating
Check for engine overload, clogged cooling fins, damaged fan, or low oil level.
Battery Not Charging
Check fuse, battery cells, and battery terminal/cable contacts.
Lighting Not Working
Inspect bulbs, switch, and check for short circuits in the wiring harness.
Tractor Vibration Issues
Check blade mounting, engine security, and blade balance for vibration causes.
Uneven Cutting Quality
Address dull blades, misaligned deck, wet/tall grass, deck buildup, and tire pressure.
Seasonal Storage and Service
End of Season Storage
Clean machine, touch up paint, change oil, drain fuel, prepare cylinder, store battery and machine.
Service Information
Provide purchase details and use original spare parts for warranty service and repairs.
Need help?
Do you have a question about the RE135B92 and is the answer not in the manual?
Questions and answers