Updating Other Fax/Mfc's Through The Network - Brother NC-8100h User Manual

Updating other FAX/MFC's through the
Network
It is possible to program Brother FAX/MFC's on the network with either
settings from an already programmed FAX/MFC or with data from the
Brother Network PC Fax Address Book.
When Brother Network PC Fax in used from a PC that has BRAdmin
Professional installed, an extra option appears in BRAdmin. By selecting a
networked FAX/MFC in the BRAdmin main window and right clicking it
you will be presented with an extra option, Configure Address Book.
When you select this option BRAdmin reads the telephone settings from that
machine (if there are any programmed) into Brother PC Fax Address Book.
Illustrated below is the Brother Address Book, on the left are One Touch /
Speed Dial numbers read from the machine. On the right is the Brother
Address Book. It is now possible to allocate One Touch / Speed Dial
numbers from the FAX/MFC into the Brother Address Book and also use
members of the Brother Address Book and send them to the FAX/MFC. You
can now make changes to the data in the Brother Network PC Fax Address
Book and click OK.
CHAPTER 14 BROTHER NETWORK PC FAX SOFTWARE
14-11