About This Device
This guide serves as an outline to assist qualified personnel with the installation
of the Compaq Power Distribution Unit (PDU).
The input voltage for this PDU is 200VAC to 240VAC. This PDU includes the
following features:
! Mounts in either 0U or 1U configuration, offering maximum flexibility for
rack space.
NOTE: 1U mounting kit sold separately (part number 215852-B21).
! Model 207590-B21 provides 12 receptacles on 2 circuit breakers.
! Models 207590-B31and 207590-D72 provide 12 receptacles on 4 circuit
breakers.
! Model 207590-B23 provides 9 receptacles on 5 circuit breakers.
Regulatory Compliance Information
All regulatory certifications for these products were obtained under the
following agency series numbers. The corresponding part model numbers are
shown.
! 207590-B21
EO3022
! 207590-D72
EO3023
! 207590-B31
EO3023i
! 207590-B23
EO3024
Important Safety Information
Read Before Installing Product
Please refer to the Important Safety Information (guide included with the PDU
kit) before installing this product.
WARNING: There is a risk of personal injury from electrical shock and
hazardous energy levels. The installation of options and routine maintenance
and service of this product must be performed by individuals who are
knowledgeable about the procedures, precautions, and hazards associated
with AC power products.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS - This Quick Installation Guide contains
important instructions for the rack-mounted PDU that should be followed during
installation.
Kit Contents
! Power Distribution Unit
! IEC-320 16A jumper cable (1) - for models 207590-B21 & 207590-B23
" Additional cable:
3.0 m length, part number 295633-B21
(ordered separately)
! IEC-320 10A jumper cables (2)
" Additional cables:
2.0 m length, part number 142257-001
2.5 m length, part number 142257-002
3.0 m length, part number 142257-003
3.6 m length, right-angled, part number 142257-004
(all ordered separately)
! Assembly, 0U mounting hardware
" Mounting brackets - 0U (2)
" Screws 1 mounting brackets to unit (6) [2 extra]
" Screws 3 mounting unit (0U) to rack (6) [2 extra]
! Cord retention hardware
" Cord retention bracket
" Screws 4 mounting bracket to unit (3) [1 extra]
! Tie wraps (15) [several extra]