Alamo Industrial Machete 2 02986941C Operator's Manual page 67

Boom Mower PRE-OPERATION Inspection
Mower ID#________________
Date:
Before conducting the inspection, make sure the tractor engine is off, all
rotation has stopped and the tractor is in park with the parking brake
engaged. Make sure the mower is resting on the ground or securely blocked
up and all hydraulic pressure has been relieved.
The Operator's Manual is in the canister on the mower
All safety decals are in place and legible
The Mounting frame bolts are in place and tight
The Boom connection bolts & pins are tight
There are no cracks in boom
The Hydraulic Cylinders pins are tight
The Hydraulic Pump hose connections are tight
The Hydraulic Valve hose connections are tight
The Hydraulic Valve controls function properly
There are no leaking or damaged hoses
The Hydraulic Oil level is full
There is no evidence of Hydraulic leaks
The Blades are not chipped, cracked or bent
The Blade bolts are tight
The Deflectors are in place and in good condition
The Mower shields are in place and in good condition
The Skid shoes are in good condition & tight
There are no cracks or holes in mower deck
The Hyd. motor mounting bolts are tight
The mower head spindle housing is tight and lubricated
Operator's Signature:
DO NOT OPERATE an UNSAFE TRACTOR or MOWER
MACHETE 2 11/08
©2008 Alamo Group Inc.
OPERATION
________________
Item
Operation Section 3-19
Make ____________________
Shift ____________________
Condition at Specific Comments if
Start of Shift not O.K.