Download Print this page

D-Link DCS-45 User Manual page 2

User manual

Advertisement

Ⅲ. Fitting instructions for camera
1
Fig.3
(A)
(B)
(C)
1. Unscrew the 3 captive retaining screws (C) and remove the housing cover (A) from the
housing base (B).
2. Release the 4 keyhole screws (F) and then slide and withdraw the camera platform (G)
from the housing base (B).
3. Mount the camera (H) onto the camera platform (G) using the 1/4" UNC screw (I) supplied,
ensuring that the insulation pad (J) is mounted between the platform and the camera.
Always check if the camera is firmly attached to the platform.
4. Connect the camera power cable to the rear terminal block (E) through the first
cable conduit (D).
5. Connect the video cable to the camera through the second cable conduit (D).
IMPORTANT NOTE:
ALWAYS UNPLUG THE TOP SECTION OF THE EARTH WIRE FROM THE BASE WIRE WHEN
DISASSEMBLING THE HOUSING. REMEMBER TO PLUG THE TOP AND BOTTOM TOGETHER
AGAIN WHEN REASSEMBLING THE HOUSING.
2
3
4
(C)
(E)
(D)
(G)
1 Camera mounting platform
5
2 Terminal block assembly
3 Cable conduits PGB13.5 x 2
4 Captive retainning 1/4" Screws x 3
5 Ground wire
(H)
(G)
(F)
(J)
(I)
2

Advertisement

loading

This manual is also suitable for:

Dcs-50