Table of Contents
Advertisement
IP Range
This option allows you to include a range of IP addresses for applying this rule.
The following fields become available for entry when this option is selected:
Start IP: Enter the starting IP address of the range.
End IP: Enter the ending IP address of the range.
Remote Secure Group
This option allows you to set the remote (destination) secure network to
which this rule should apply. This option allows you to apply this rule
inclusively on all computers in the external network. Use the "Type" drop-
down list to select one of the following:
IP Address, Subnet IP, Range: Select any of these and enter details as
described in the Local Secure Group above.
Remote Secure Gateway
Enter the appropriate IP address for the remote secure gateway.
Key Management
Two modes are supported: preshared key and manual key.
Preshared Key
Select Preshared Key from the Key Management drop-down list.
IKE Proposal Settings
Preshared Key
Enter the shared secret (this should match the secret key at the other end).
Encryption / Authentication
Select the IKE authentication and encryption from the drop-down list.
• All
• 3DES & SHA1-DH2
• 3DES & MD5-DH2
• DES & SHA1-DH2
• DES & MD5-DH2
• 3DES & SHA1-DH1
• DES & MD5-DH1
Note: It is recommended that you choose All to have all the IKE
proposals associated with the current tunnel and allow IKE to au-
tomatically select one (among the set of IKE proposals) to commu-
nicate with its peer. However, if a specific proposal is required, then
it can be chosen from the list.
• DES & SHA1-• DH1
• DES & MD5-DH1
• 3DES & SHA1-DH5
• 3DES & MD5-DH5
• DES & SHA1-DH5
• DES & MD5-DH5
ASUS VPN ADSL Router
Chapter 10
93
Advertisement
Table of Contents
