Quick Start Guide; Connecting The Hardware; Connect The Adsl Line - Asus SL6000 User Manual

3. Quick Start Guide

This Quick Start Guide provides basic instructions for connecting the SL6000/
SL6300 to a computer or a LAN and to the Internet via ADSL.
• Part 1 provides instructions to set up the hardware.
• Part 2 describes how to configure Internet properties on your
computer(s).
• Part 3 shows you how to configure basic settings on the SL6000/SL6300
to get your LAN connected to the Internet.
After setting up and configuring the device, you can follow the instructions to
verify that it is working properly.
This Quick Start Guide assumes that you have already subscribe ADSL service
with your Internet service provider (ISP). These instructions provide a basic
configuration that should be compatible with your home or small office network
setup. Refer to the subsequent chapters for additional configuration instructions.

3.1 Connecting the Hardware

In 3.1, you should connect the device to an ADSL line, the power outlet, and
your computer or network.
WARNING: Before you begin, turn the power off for all devices.
These include your computer(s), your LAN hub/switch (if applicable),
and the SL6000/SL6300.
For hardware connections, please follow the steps that follow for specific
instructions.

3.1.1 Connect the ADSL line

For SL6000/SL6300: Connect your ADSL line to the port labeled ADSL on
the rear panel of the device. Connect the other end of the line to the wall phone
jack or to the POTS splitter (Optional).
ASUS VPN ADSL Router
Chapter 3
13