Mnp/V.42/V.42Bis/V.44 Commands; Fax Class 1 Commands - Lenovo 410556U - Topseller S20 Twr W3520 2.66G 4Gb 500Gb Dvdrw Wvb User Manual

User guide
Table of Contents

Advertisement

Command
+MS=?
+MS=a,b,c,e,f

MNP/V.42/V.42bis/V.44 commands

Command
%C_
%C0
%C1
%C2
%C3
&Q_
&Q0
&Q5
&Q6
+DS44=0, 0
+DS44=3, 0
+DS44?
+DS44=?

Fax Class 1 commands

+FAE=n
+FCLASS=n
+FRH=n
+FRM=n
+FRS=n
+FTH=n
+FTM=n
+FTS=n
46
ThinkStation User Guide
Function
Displays a list of supported Select Modulation options
Select modulation where: a=0, 1, 2, 3, 9, 10, 11, 12, 56, 64,
69; b=0-1; c=300-56000; d=300- 56000; e=0-1; and f=0-1.
A, b, c,d, e, f default=12, 1, 300, 56000, 0, 0. Parameter "a"
specifies the modulation protocol desired where: 0=V.21,
1=V.22, 2=V.22bis, 3=V.23, 9=V.32, 10=V.32bis, 11=V.34,
12=V.90,K56Flex,V.34......,56=K 56Flex, V.90,V.34......,
64=Bell 103, and 69=Bell 212. Parameter "b" specifies
automode operations where: 0=automode disabled, 1=
automode enabled with V.8/V.32 Annex A. Parameter "c"
specifies the minimum connection data rate (300- 56000).
Parameter "d" specifies the maximum connection rate
(300-56000); Parameter "e" specifies the codec type (0=
Law, and 1=A-Law). Parameter "f" specifies "robbed bit"
signaling detection (0=detection disabled 1=detection
enabled)
Function
Disable MNP Class 5 and V.42bis data compression
Enable MNP Class 5 data compression only
Enable V.42bis data compression only
Enable MNP Class 5 and V.42bis data compression
Direct data link only (same as \N1)
V.42 data link with fallback options
Normal data link only (same as \N0)
Disable V.44
Enable V.44
Current values
List of support values
Data/Fax Auto Answer
Service Class
Receive data with HDLC framing
Receive data
Receive silence
Transmit data with HDLC framing
Transmit data
Stop transmission and wait

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkstation 4105Thinkstation 4157Thinkstation 4217

Table of Contents