Advertisement
1. Turn On Your Nokia IP60 Appliance
•
Connect the power supply to the power port on the rear panel of the IP60 appliance,
and then plug it into the power outlet.
•
The Power LED on the front panel starts flashing, indicating that your IP60 appliance is
now turned on.
2. Connect Your Network
•
Connect one end of your network cable to one of the four IP60 LAN ports and the other
end to your PC. If you have additional PCs or other network devices you can connect
them to other LAN ports.
•
A corresponding LAN LED lights up, for each connected computer.
•
Connect one end of the telephone cable provided with your IP60 appliance to the
WAN socket on the rear panel of your IP60 appliance and the other end into the cable
modem, as shown in the figure below.
•
Make sure your cable modem is powered on.
•
The WAN LED will light up, indicating proper connection to your modem.
3. Configuring Your PC
Before continuing, make sure that all of your PCs are configured correctly.
For Windows XP Operating Systems:
•
•
•
•
•
•
•
•
Network Diagram
Cable
modem
Nokia IP60
PC
Open the Control Panel window by clicking
Select Network and Internet Connections.
Select Local Area Connection and
double-click to open.
Select Properties.
Select Internet Protocol (TCP/IP),
Properties.
Under the General Properties tab, select
Obtain an IP address automatically and
select Obtain DNS server address
automatically.
Select OK and then select Close.
If you are prompted to restart your PC, click Yes.
Note: The configuration process varies between operating systems. If you are
using a Macintosh or another operating system, please consult the Nokia IP60
User Guide, which is available on the included CD-ROM.
and then choosing Control Panel.
Advertisement
