Rec/Rec Mute Button; Music Search System; Tape Counter And Memory Stop - Denon DN-720R Operating Instructions Manual

REC/REC MUTE BUTTON

REC/REC MUTE is the DENON's unique and convenient function. By using this button, it is
easily possible to insert a suitable space (the non-recorded part) between two melodies.
1. When you want to make about 5 seconds of non-recorded part after the recording state:
Press the REC/REC MUTE button. The recorder will automatically create about 5
seconds of non-recorded part and will stay in the recording standby state.
2. To create about 5 seconds of non-recorded part after the standby state: Press the
REC/REC MUTE button, and the recorder will enter the non-recording state,
automatically create about 5 seconds of non
recorded part anti stay in the standby stare

MUSIC SEARCH SYSTEM

This device is a convenient system which detects the non-recorded part of more than 4
seconds between melodies, cues the next melody while the present melody is being
reproduced or automatically detects the beginning of the melody now being reproduced and
makes it into the reproduceable state.
1. For cueing the next melody while the present melody is being reproduced:
At PLAY mode, depress the PLAY button and the FF button simultaneously. This device
will detect the interval between melodies with the CUE state on, automatically become
the PLAY mode and begin performing the next melody.
2. For hearing again the melody being reproduced:
At PLAY mode, depress the PLAY button and the REW button simultaneously. This
device will detect the interval between melodies with the REVIEW state on,
automatically become the PLAY mode, detect the beginning of the melody now being
performed and play it from the first again.

TAPE COUNTER AND MEMORY STOP

10
3. To cancel the non-recording state (the REC MUTE state): Press the PAUSE button, and
the recorder will cancel the non-recording state and will stay in the standby state.
4. To extend the non-recording state (the REC MUTE state) for further 5 seconds or more:
Press the REC/REC MUTE button, and the non-recorded part will automatically
be extended for another 5 seconds.
NOTE: Note about MUSIC SEARCH action:
MUSIC SEARCH is a function which operates by detecting a comparatively long non-recorded
part on the tape. Therefore, MUSIC SEARCH may not operate normally in the following
cases.
• Sound on the tape is interrupted by speech or conversation.
• Long periods of pianissimo (Softly played music) or non-recorded intervals occur on the
tape.
• The tape has picked up noise in a non-recorded interval.
• Non-recorded intervals on the tape are less than 4 seconds in length.
• Noise-emitting electrical appliances are in operation nearby, i.e.; Electric razors, drills,
refrigerators, etc.