Advertisement
Advertisement
If there is no sound, the volume level might be low, so you should adjust the volume level. If the attenuator is on, turn the attenuator off.
To pair a new device from the unit, first display the Bluetooth Connection Menu. Then, touch Connection to select a device, and touch Start to search. Once available devices are found, touch a device name to select the device you want to connect to. While connecting, "Pairing" will be displayed, followed by "Paired" if successful. If the connection fails, "Connection Error" will be displayed, and you should try again from the beginning. The default PIN code is 0000, but it can be changed. You can also initiate a connection from your cellular phone by putting the unit in initiating a connection mode and then using your phone to connect. For Bluetooth audio devices, put the unit in initiating a connection mode and if your Bluetooth audio player is ready for connection, it will automatically establish the connection.
If the power will not turn on, it may be due to:
If Bluetooth is not working, the communication might have failed. To resolve this, disconnect the cable from the iPod (if connected). Once the iPod's main menu is displayed, reconnect the iPod and reset it. If the issue persists, the iPod firmware version might be old, in which case you should update the iPod version.
To ensure safe driving, certain functions, including video playback on the front display, are disabled unless the parking brake is on and the vehicle is not in motion. The light green lead at the power connector is designed to detect parked status and must be connected to the power supply side of the parking brake switch. Improper connection or use of this lead may violate applicable law and result in serious injury or damage. If the image is not displayed, it may be because the parking brake cable is not connected or the parking brake is not applied. To resolve this, connect the parking brake cable and apply the parking brake.
To perform a factory reset, you need to reset the microprocessor. First, turn the ignition switch OFF. Then, press RESET with a pen tip or other pointed instrument. This will return the microprocessor to its initial settings without changing bookmark information. You should perform this reset before using the unit for the first time after installation, if the unit fails to operate properly, or if strange or incorrect messages appear on the display.
To access and adjust audio settings, first display the audio function menu. From there, you can adjust various settings:
To update the Bluetooth connection software, first turn the unit off. Then, display the system menu and touch Bluetooth Software Update. Finally, touch Start to display the data transfer mode and follow the on-screen instructions.
To clear the Bluetooth memory, first turn the unit off. Then, display the system menu and touch Bluetooth Memory Clear. Finally, touch Clear, and when the confirmation display appears, touch OK. Do not turn the unit off while the Bluetooth memory is being cleared.
To delete a paired Bluetooth device, first display the Bluetooth Connection Menu. Then, touch Connection to select a device, and touch Delete OK? followed by Yes to delete the device. Do not turn the unit off while the paired Bluetooth telephone is being deleted.
To set the clock, first switch to the Clock Adjustment display. Then, select the item to set and touch the up or down arrows to set the correct date and time.
The Pioneer AVH-3250BT supports USB 1.1 and USB 2.0 full speed for USB devices. It is compatible with MSC (Mass Storage Class) devices and supports FAT16 and FAT32 file systems. The maximum current supply is 500 mA. It can play MP3, WMA, and AAC files from USB storage devices. Partitioned USB memory is not compatible with this unit.
If disc playback is not possible, it may be due to:
The Pioneer AVH-3250BT is compatible with DivX video format implemented in relation to DivX standards. The file extensions supported are .avi or .divx.
The unit's rear output can be used for either full-range speaker or subwoofer connection. If set to Subwoofer, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amplifier. The unit also has a preout maximum output level of 4.0 V.
Yes, you can customize the display background. First, display the entertainment menu. Then, touch Background and select the desired setting. If no JPEG images are stored, you cannot select photo.
Need help?
Do you have a question about the AVH-P4250DVD and is the answer not in the manual?
Questions and answers