The Machine - Konica Minolta bizhub 181 User Manual

4
No. Item
4 Printer indicator
5 [Printer] key
6 [Clear/Stop] key
7 Start indicator
8 Caution indicator
Note
The [Fax] key and the fax function keys can be used only if the optional
fax kit is installed on the machine.
The [Scan] key can be used only if the optional fax kit and optional net-
work interface card NC-503 or image controller IC-206 are installed on

the machine.

4-2
Description
• This indicator flashes when the machine is receiving print
data.
• This indicator lights up when the machine is printing the
print data. (The indicator lights up if data is being received
at the same time.)
• This indicator goes off if there is no print data.
• Refer to "Printer indicator" on page 4-3.
• Press this key when the machine is receiving print data
(Printer indicator is lit) to display the Printer mode screen.
• To return to the mode before entering Printer mode, press
this key while the Printer mode screen is displayed.
• If there is no print data in the machine's memory, the Printer
mode screen does not appear, even if the [Printer] key is
pressed.
• To cancel the current print job while print data is being re-
ceived, press the [Printer] key, and then press this key
when the Printer mode screen appears. Refer to "Canceling
a print job" on page 4-4.
• This indicator lights up in orange when the machine is re-
ceiving print data.
• This indicator lights up when an error or malfunction has
occurred.
Control panel operations
GDI Printer Controller