Installing The Printer Driver By Using The Add Printer Wizard; Connecting To A Computer Through A Network - Konica Minolta bizhub 181 User Manual

Installing the printer driver
2.4 Installing the printer driver by using the Add Printer
Wizard

Connecting to a computer through a network

If this machine is connected to a computer through a network, the printer
driver can be installed either before or after the connection is established.
Note
The optional network interface card NC-503 or image controller IC-206
must be installed in order to establish a network connection.
% Use the network cable to connect this machine to the computer.
The remainder of the printer driver installation procedure differs depending
on the operating system. Follow the appropriate procedure according to the
operating system being used.
- For Windows XP and Windows Server 2003: "Installing using the Add
Printer Wizard on Windows XP/Server 2003" on page 2-14
- For Windows Vista: "Installing using the Add Printer wizard on Windows
Vista" on page 2-17
- For Windows 2000: "Installing using the Add Printer Wizard on Windows
2000" on page 2-21
- For Windows Me/98 SE: "Installing using the Add Printer Wizard on Win-
dows Me/98 SE" on page 2-24
Note
With Windows XP, Server 2003, Vista and 2000, log on as a user with Ad-
ministrator privileges to install the printer driver.
GDI Printer Controller
2
2-13