QUICK DAM Water Curb QDWC1010 Manual

INSTRUCTIONS:
Place it & fill it. It's really that easy!
1. Lay in desired location. Note: Once filled they can
be heavy and difficult to move.
2. Remove cap, insert hose & turn on water.
3. When filled, remove hose & replace cap.
Note: In freezing weather, fill 2/3 full.
4. To drain, remove cap & lift opposite end
of curb to the spout.
In freezing weather, fill 2/3 full.
5. Store away for later.
* Note: Material is not puncture-proof. 6.5" size can be driven over, but
inner excess air must be removed first & should only be filled 2/3 full.
10" size could scrape undercarriage & cause it to pop.
AVAILABLE SIZES:
6.5in x 5ft (16.5cm x 1.5m)
6.5in x 10ft (16.5cm x 3m)
6.5in x 20ft (16.5cm x 6m)
THE NEXT GENERATION IN FLOOD PROTECTION
Fill with
water!
10in x 5ft (25cm x 1.5m)
10in x 10ft (25cm x 3m)
10in x 20ft (25cm x 6m)
888-761-4405
QUICKDAMS.COM
TM
1.
2.
3.
4.
5.