BEMIS CLEAN SHIELD 7YE85320ARM Installing

Installing Support Arms onto your CLEAN SHIELD
Support Arms can be installed when the seat is new or after it has been installed and used
NO, Caps are not installed:
> Follow Support Arm Installation
L
Front
1
Confirm the Support Arms are on the correct side
3
Gently press "Lock Button"
A) Using a thin flat edge (putty or butter knife) pry the ring
bumpers off the seat
BemisIndependence.com
Q: Are the Caps installed on the seat?
SUPPORT ARMS INSTALLATION
R
Front
REMOVE CAPS INSTRUCTIONS
A
seat
™
YES, Caps are installed:
> First, follow Remove Caps Instructions
> Second, follow Support Arms Installation
2
Slide Support Arm into the mounting hole
click
4
Continue to slide into the mounting hole until the Lock
Button "clicks" and is locked into place
B
B) Depress the "Lock Button" to unlock the Cap
C) Pull the Cap to remove it
Independence
C
Customer Service: 833-431-1703
A05303INS01