Flanger; Phaser; Tremolo; Panner - DigiTech RP90 Owner's Manual

Modeling guitar processor
Table of Contents

Advertisement

Flanger

A Flanger uses the same principle as a Chorus but uses a shorter delay time and adds regeneration
(or repeats) to the modulating delay. This results in an exaggerated up and down sweeping motion
to the effect. Settings are F1-F9.

Phaser

A phaser splits the incoming signal, and then changes the phasing of the signal. This signal is then
taken in and out of phase and mixed back in with the original signal. As the phasing changes, differ-
ent frequencies get canceled resulting in a warm sort of twisting sound. Settings are P1-P9.

Tremolo

A Tremolo effect modulates the volume of the signal at an even rate. Settings are t1-t9.

Panner

A Panner modulates the sound from left to right at an even rate. Settings are n1-n9.

Vibrato

A Vibrato effect modulates the pitch of the incoming signal at an even rate. Settings are b1-b9.

Rotary Speaker

Rotary Speaker is an emulation of a device that included a spinning horn and woofer. The rotation
of these two speakers produced an interesting combination of the sound panning from side to
side. This produced a slight pitch change due to the speed of the sound coming towards, and then
going away from the listener. Settings are r1-r9.
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents