DigiTech RP12 Owner's Manual page 56

54
Section 6 - Pedalboard Set-Up
¡LEDs:Normal
≤™Bank Names
• Press Function button <MIX
like this:
¡BANK NUMBER 1
Top 5-1
• Press Function button <Name> button and the display will look some-
thing like this:
Top 5-1
¡CAPs ™SPC £NUM
• Using the <UP/DOWN> Parameter buttons, scroll to the character
you want to use, or press one of the Function buttons. When you
have selected the character you want, press the <RIGHT> Parameter
key. Note that the cursor moves to the next character. Repeat this
procedure until the Bank name is satisfactory.
• Once the bank has been named, press function button <Name> to
exit Bank naming utility.
RP-12 Owner's Manual
™
> and the display will look something