CDN INSTARED IR220-F Manual

IR220-F 12/26/01 10:19 AM
Hot Beverage & Frothing
T
HERMOMETER
FEATURES
The IR220-F will quickly and accurately measure the
temperature of beverages and frothed milk. A computer-
designed stainless steel clip will hold the thermometer
stem snuggly against any container. A positive lock,
quick-release action, permits the thermometer stem to
be adjusted to the desired height.
When the clip is removed from the stem, this
INSTA-READ® it can be used for all general purpose
cooking needs.
Important: A polycarbonate lens is used for a watertight
seal. It may be damaged if left in a hot oven. Clean ther-
mometer stem before inserting it into food or beverage.
Note: To adjust the position of the clip, gently
compress the bend of the clip as shown. Slide
the clip up, or down, to the desired position.
Please remember to clean the thermometer
stem before inserting it into food.
Temperature sensor is between
"dimple" and tip of stem. For best
accuracy stem should be inserted
into food to dimple or higher.
Loop holds thermometer stem.
FREE 23-page booklet on
"TEMPERATURE - THERMOMETER - TIPS."
Send a self-addressed stamped envelope to
CDN Customer Service
PO Box 10947, Portland, OR 97296.
5 Year Limited Warranty: Any instrument that
proves to be defective in material or workmanship
within five years of original purchase will be repaired
or replaced without charge upon receipt of the unit
prepaid at the address listed to the right. This
warranty does not cover damage in shipment
or failure caused by tampering, obvious
carelessness or abuse.
Model IR220-F
Made in China, © 2001 Component Design Northwest
Page 2
Component Design
Northwest, Inc.
P.O. Box 10947
Portland, OR 97296
info@cdnw.com
www.cdnw.com