Key Charts; Device Table; Programming Device Control - One for All URC3220 Manual

WALRB3P manual booklet

Key Charts

When the LED (red light) blinks, the remote control
is working and (after programming) is sending
signals.
Press DVD/VCR, CBL/SAT, or TV once to select a
desired home entertainment device to control.
Also see the Device Table on page 6.
Press POWER once to turn on or off the selected
device. For master power control, see Programming
A Master Power Macro on page 10.
Use the keypad (1 ~ 9 and 0) to directly select
channels (e.g., 009 or 031).
Use TV/VID to switch the TV's input to view TV or
video programs.
Press ENTER once after entering the channel
numbers on some TVs.
Use GUIDE to display your selected device's
program guide or setup menu.
Press MENU once to display your selected device's
main menu.
Use INFO to display the current channel and
program or on-screen directory.
Use EXIT to exit from your selected device's guide
or menu.
Use the Cursor Keys to move the cursor in the pro-
gram guide and menu screens.
Use SELECT (OK) to choose options from your
selected device's menu or guide.
Press LAST once to recall the last channel.
Use FAV to scan all channels, or after programming,
to scan up to10 favorite channels.
Use CH+ (or CH-) to select the next higher (or
lower) channel.
Press SUBTITLE/CC once to display (or turn off) sub-
titles or closed captions,if available on your DVD
player or cable/satellite service.
For a PVR (or DVR), press PVR MENU once to dis
play a list of your recorded shows.
Press MUTE once to turn the sound off or on.
Use VOL+ (or VOL -) to raise (or lower) the sound
volume.
5/2/06 3:13 PM Page 5
5
Use REW, PLAY, FWD, PAUSE,or STOP to control your VCR,
PVR (or DVR), or DVD player.
For a DVD player, use SKIP F. or SKIP R. to view the next
or previous chapter.
For a VCR, PVR (or DVR), or VOD (if available), use SCAN-
or SCAN+ to quickly scan forward or back through a video
program. Use REPLAY for an instant replay. Use QUICK
SKIP to advance the video program a preset amount (as
set on your device).
Press REC twice to record a VCR or PVR (or DVR)
program.
Use SLEEP to set the sleep timer on a selected device if
equipped with this feature.
Use SET for all programming sequences.

Device Table

NOTE: Please refer to the table below when performing the instructions in "Programming
Device Control"on page 8.
After programming, the One For All 3 Device Universal Remote Control will
be able to control the following types of devices:
DEVICE KEY CONTROLS THESE TYPES OF DEVICES
• DVD Player
• VCR
• PVR (or DVR)
• TV/DVD Player Combo
• VCR/DVD Player Combo
• TV/VCR Combo
• TV/VCR/DVD Player Combo
• VCR/DVD Player Combo
• Cable Box (or Converter)
• Cable Box/PVR (or DVR) Combo
• Satellite Receiver
• Satellite Receiver/PVR (or DVR) Combo
• Television
6