Checking Your Hdtv'snetwork Connection; Manual Configuration - Sanyo DP55360 - 55"Class LED LCD HDTV Application Manual

SETTING UP YOUR HOME NETWORK _________________
CHECKING YOUR HDTV'S
NETWORK CONNECTION
Please follow these simple steps to verify your HDTV's
communication with your LAN (Local Area Network.)
1. Turn on your HDTV.
2. Press the MENU key on your remote.
3. Use the CURSOR keys to select the Setup option
from the main menu and press ENTER.
4. Select the Network option and press ENTER.
5. Select Connect Test and press ENTER.
This connect test will verify if in fact your HDTV is
correctly setup to your Network.
NOTE: Your LAN must be properly setup and have an active
Internet signal.
Please use contact information on bottom of page for
any issues that might arise.

MANUAL CONFIGURATION

A manual configuration might be needed to setup your
IP Address, Subnet Mask, Default Gateway and DNS
Server.
If such is the case, please follow these steps:
1. From the main menu select Setup and press ENTER.
2. Select Network and press ENTER.
3. Select Setting Mode and press ENTER.
4. Select the desired parameter you which to modify
and press ENTER.
5. Use the CURSOR keys or the NUMERICAL keys on
your remote to input the correct sets of numbers and
press ENTER.
6. When finished, press the MENU key to return to the
previous screen.
7. Select Connect Test and press ENTER so your HDTV
may verify connectivity to the LAN.
4
Need help?
www.sanyoctv.com
NOTE: If connect test fails when using a router,
please connect HDTV directly to
modem and repeat the process, if suc-
cesful, try once more through router.
MANUAL SETTING SCREEN*
* Sample values used as reference only
1-877-864-9604
NETWORK SCREEN