Wall Bracket Angle Adjustment - Samsung 400FP-2 - SyncMaster - 40" LCD Flat Panel Display Quick Start Manual

4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket
holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to
re-insert and tighten the safety pin (3) to securely hold the product to the bracket.
A -
B -
C -

Wall Bracket Angle Adjustment

Adjust the bracket angle to -2° before installing it on the wall.
1. Fix the product to the wall bracket.
2. Hold the product at the top in the center and pull it forward (direction of the arrow) to
adjust the angle.
Note
You can adjust the bracket angle between -2° and 15°.
Introduction
LCD Display
Wall Bracket
Wall