Giant CLIP AND GO - FOLDING GUIDE 2009 Manual

Download this manual

Enlarged version

FOLDING INSTRUCTIONS (continued)

STEP 4

NOTE: MAKE SURE ThE UppER pART Of ThE hANdlEbAR STEM lOcKS SEcUREly

iNTO ThE plASTic hOldER ON ThE fRAME (fiG. 12 ANd 13). chEcK TO bE cERTAiN

ThAT cAblES ARE NOT hOOKEd bEhiNd OThER pARTS OR bENT ANd cRiMpEd whEN

fOldiNG ThE STEM.

FIG. 12

FIG. 13

STEP 5

Fold the pedals by pushing against the side of the pedals, so the platform moves inward. Then fold

the pedal by rotating the pedal surface 90 degrees up or down (FIG. 14 and 15).

FIG. 14

FIG. 15

both frame quick releases have an adjustment nut that controls the clamping force. A

force of 11 – 17 lbf (5 – 8 kgf) is required to open and close each quick release. if ThE

clAMpiNG fORcE iS iNSUfficiENT TO clOSE ANd lOcK EiThER qUicK RElEASE,

dO NOT RidE ThE biKE! See your Authorized Giant Retailer for adjustment. MAKE

SURE ThAT ThE fUNcTiON Of ThE AdJUSTMENT NUT ANd All qUicK RElEASES ARE

dEMONSTRATEd by ThE bicyclE dEAlER bEfORE USiNG ThE clip bicyclE!

WARRANTY

For complete details of the warranty, please refer to the Giant Owner's Manual or visit our website:

www.giantbicycle.com

NOTE: TO UNfOld ThE clip fOR RidiNG,

REvERSE ThE pROcEdURE. UNfOld ThE

pEdAlS ANd bE cERTAiN ThE plATfORMS ARE

lOcKEd iN A flAT pOSiTiON. MAKE SURE All

qUicK RElEASES fOR ThE hANdlEbAR STEM,

fRAME, ANd SEAT pOST ARE SEcUREly fixEd.

WARNING

CLIP AND GO GUIDE

Page 1 FOLDING INSTRUCTIONS (continued) STEP 4 NOTE: MAKE SURE ThE UppER pART Of ThE hANdlEbAR STEM lOcKS SEcUREly iNTO ThE plASTic hOldER ON ThE fRAME (fiG. 12 ANd 13). chEcK TO bE cERTAiN ThAT cAblES ARE NOT hOOKEd bEhiNd OThER pARTS OR bENT ANd cRiMpEd whEN fOldiNG ThE STEM.
Page 2 CLIP AND GO GUIDE FOLDING INSTRUCTIONS (continued) STEP 2 Thanks for purchasing the CLIP folding bicycle! This guide will help you properly fold and unfold your Steady the bike frame and unlock the frame quick release on the top tube (FIG. 5). Next, unlock the CLIP.

Clip and goClip