Download  Print this page

Replacement Of Rocker Arm; Replacement Of Rear Triangle - Giant ANTHEM Service Manual

Hide thumbs

Advertisement

Replacement of rocker arm

Before dismantling the rocker arm:
Remove the rear shock.
Rear Triangle Bolt
Repeat Step 1 in reverse to reassemble the rocker arm.
Recommended torque for the rear triangle bolt is 120-150 kgf-cm.
Recommended torque for the rock arm bolt is 90-110 kgf-cm.
Recommended torque for the shock mounting bolt is 90-110 kgf-cm.

Replacement of Rear Triangle

Before dismantling the rear triangle:
Remove the rear wheel set.
Remove the crank, chain wheel, chain.
Remove the rear brake.
Remove the rear ends, derailleur.
Repeat Step 1 in reverse to reassemble the rear triangle.
Recommended torque for the rear triangle bolt is 120-150 kgf-cm.
Rock arm
Rock arm Bolt
Bolt
Bolt
Step 1:
Loosen the bolt and remove the
rocker arm.
Step 1:
Loosen the rear triangle bolt and
remove the rear triangle.

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: