Fully Automatic Flash Shooting - Canon Speedlite 430EXII Instruction Manual

Fully Automatic Flash Shooting
When you set the camera's shooting mode to
< P >
(Program AE) or
(Full Auto), E-TTL IIIE-TTL fully automatic flash will make it as
easy as normal
AE
shooting in the
<P>
and
modes.
1
4
Set the Speedlite to
cETTL>.
tp=@
# I
o Press the
<MODE>
button so that
<ETTL>
is displayed.
--
When you press the shutter button
Maximum effective raAge
halfway, the maximum effective range
(distance) of the flash will be
displayed.
focus.
a The shutter speed and aperture will
be set as displayed in the viewfinder.
F
Check that the
< f
> icon is lit in the
viewfinder.
Take the picture.
'
*
When you press the shutter button
completely, the flash
w~ll
fire and the
p~cture w ~ l l be taken
I
*
If a standard flash exposure was
- -
obta~ned the flash exposure
conf~rmat~on lamp (green) w ~ l l l~ght for
about 3 sec
0
If the lens focal length blinks on the LCD panel, the periphery of the flash
picture may turn out dark. Use the built-in wide panel (p.18).
a
<ETTL>
will be displayed on the LCD panel even if the camera is
compatible with
E-TTL
II
0
If the flash exposure confirmation lamp does not light, move closer to the
subject and take the picture again. With a digital camera, you can also
increase the camera's IS0 speed.