About Slave Group Control
- -
-
1
Slave group
A
For example, ~f you have the slave ID set
I
/----
to
< A >
for three slave un~ts, all three
slave un~ts will be controlled as ~f they
were one Speedl~te In slave group A
Setting Manual Flash with the Slave Unit
-
Manual flash can be set manually with the slave unit. Do this in the
following cases:
(1) When you want to set the flash output with the slave units
individually for wireless or manual flash, as with studio flash units.
(2) When you use Speedlite Transmitter ST-E2 for wireless or manual
flash.
s
Hold down the
<MODE>
button for2
sec. or more.
b
<M>
will bl~nk.
+ .
Set the manual flash output. (p.19)