Overview; Vehicle Coverage - Launch Creader Elite Hd User Manual

Table of Contents

LAUNCH

1 Overview

This diagnostic tool is designed to work with OBD II/CAN, J1587, J1708

and J1939 compatible vehicles.

OBD II was installed in some 1994 and 1995 model year gasoline vehicles.

To verify if a 1994 or 1995 vehicle is OBD II compliant, check the

following:

1. Vehicle Emissions Control Information (VECI) Label. It is located

under the hood or by the radiator of most vehicles. If the vehicle is OBD

II compliant, the label will designate OBD II Certified.

2. Government regulations mandate that all OBD II compliant vehicles must

have a "common" 16-pin Data Link Connector (DLC).

Note: Some 1994 and 1995 vehicles have 16-pin connectors but are not OBD II

compliant. Only those vehicles with a Vehicle Emissions Control Label stating

OBD II Certified are OBD II compliant.

Table of Contents

Do you have a question about the Creader Elite HD and is the answer not in the manual?