Sony ICF-C05IPBLK - Clock Radio For Ipod Operating Instructions

4-174-732-11(1)
FM
Clock Radio
Operating Instructions
ICF-C05iP
Dream Machine is a trademark of Sony Corporation.
No Power No Problem is a trademark of Sony Corporation.
©2010 Sony Corporation Printed in China
Owner's Record
Important Safety
Instructions
The model number and the serial number are located on
the bottom.
1) Read these instructions.
Record the serial number in the space provided below.
Refer to them whenever you call upon your Sony dealer 2) Keep these instructions.
regarding this product. 3) Heed all warnings.
4) Follow all instructions.
Model No. ICF-C05iP
5) Do not use this apparatus near water.
Serial No. ________________________________
6) Clean only with dry cloth.
7) Do not block any ventilation openings.
Install in accordance with the manufacturer's
For customers who purchased this product in the
instructions.
USA
Please register this product on line at 8) Do not install near any heat sources such as
http://www.sony.com/productregistration. radiators, heat registers, stoves, or other
Proper registration will enable us to send you
apparatus (including amplifiers) that produce
periodic mailings about new products, services,
heat.
and other important announcements. Registering
9) Do not defeat the safety purpose of the
your product will also allow us to contact you
polarized or grounding-type plug. A polarized
in the unlikely event that the product needs
plug has two blades with one wider than the
adjustment or modification. Thank you.
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
WARNING
or the third prong are provided for your safety.
If the provided plug does not fit into your
To reduce the risk of fire or electric shock, do
outlet, consult an electrician for replacement
not expose this apparatus to rain or
of the obsolete outlet.
moisture.
10) Protect the power cord from being walked on
To reduce the risk of fire, do not cover the
or pinched particularly at plugs, convenience
ventilation of the apparatus with newspapers,
receptacles, and the point where they exit
tablecloths, curtains, etc. And do not place lighted
from the apparatus.
candles on the apparatus.
11) Only use attachments/accessories specified by
To reduce the risk of fire or electric shock, do not
the manufacturer.
expose this apparatus to dripping or splashing,
12) Use only with the cart, stand, tripod, bracket,
and do not place objects filled with liquids, such
or table specified by the manufacturer, or sold
as vases, on the apparatus.
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
Do not install the appliance in a confined space,
combination to avoid injury from tip-over.
such as a bookcase or built-in cabinet.
Do not expose the batteries (battery pack or
batteries installed) to excessive heat such as
sunshine, fire or the like for a long time.
As the main plug of AC power adaptor is used to
13) Unplug this apparatus during lightning storms
disconnect the AC power adaptor from the mains,
or when unused for long periods of time.
connect it to an easily accessible AC outlet.
14) Refer all servicing to qualified service
Should you notice an abnormality in it,
personnel. Servicing is required when the
disconnect it from the AC outlet immediately.
apparatus has been damaged in any way, such
You are cautioned that any changes or as power-supply cord or plug is damaged,
modifications not expressly approved in this liquid has been spilled or objects have fallen
manual could void your authority to operate this
into the apparatus, the apparatus has been
equipment.
exposed to rain or moisture, does not operate
normally, or has been dropped.
CAUTION
For the state of california, USA only
Danger of explosion if battery is incorrectly
Perchlorate Material –special handling may apply,
replaced. Replace only with the same type.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
NOTE
Perchlorate Material: Lithium battery contains
perchlorate
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
Features
are designed to provide reasonable protection
against harmful interference in a residential
 Wake or sleep to iPod/Radio
installation. This equipment generates, uses and
 FM digital synthesized tuner
can radiate radio frequency energy and, if not
 20 Station Presets (20 FM)
installed and used in accordance with the
 Brightness Control (High/Mid/Low/Off)
instructions, may cause harmful interference to
 Extendable Snooze system from 10 to 60 min
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
Precautions
cause harmful interference to radio or television
reception, which can be determined by turning
 Play the unit on the power source specified in
the equipment off and on, the user is encouraged
"Specifications. "
to try to correct the interference by one or more
 To disconnect the AC power cord (mains lead),
of the following measures:
pull it out by the plug, not the cord.
– Reorient or relocate the receiving antenna.
 The unit is not disconnected from the AC
– Increase the separation between the
power source (mains) as long as it is connected
equipment and receiver.
to the wall outlet, even if the unit itself has been
– Connect the equipment into an outlet on a
circuit different from that to which the turned off.
receiver is connected.
 Since a strong magnet is used for the speaker,
– Consult the dealer or an experienced radio/
keep personal credit cards using magnetic
TV technician for help.
coding or spring-wound watches away from the
unit to prevent possible damage from the
WARNING
magnet.
 Replace the battery for the clock backup with a
 Do not leave the unit in a location near a heat
Sony CR2032 lithium battery only. Use of
source such as a radiator or airduct, or in a
another battery may present a risk of fire or
place subject to direct sunlight, excessive dust,
explosion.
 Battery may explode if mistreated. Do not mechanical vibration, or shock.
 Allow adequate air circulation to prevent
recharge, disassemble or dispose of in fire.
internal heat build-up. Do not place the unit on
 Dispose of used battery promptly. Keep away
a surface (a rug, a blanket, etc.) or near
from children.
materials (a curtain) which might block the
ventilation holes.
 Should any solid object or liquid fall into the
unit, unplug the unit and have it checked by
qualified personnel before operating it any
further.
 To clean the casing, use a soft cloth dampened
with a mild detergent solution.
 Never touch the wire of the external FM
antenna during a thunderstorm. Furthermore,
immediately disconnect the AC power cord
from the radio.
NOTES ON LITHIUM BATTERY Compatible iPod models
 Wipe the battery with a dry cloth to assure a
The compatible iPod models are as follows.
good contact.
Update your iPod to use the latest software before
 Be sure to observe the correct polarity when
you use it.
installing the battery.
 Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
iPod nano
Troubleshooting
5th generation
iPhone 3GS
(video camera)
Should any problem persist after you have made
the following checks, consult your nearest Sony
dealer.
The clock flashes "AM 12:00" due to a power
interruption.
 Check the battery indicator. If the battery
indicator is "  , " replace the battery. iPod nano
4th generation
Remove the old battery and install a new one.
iPhone 3G
(video)
The radio, iPod or buzzer alarm does not
sound at the preset alarm time.
 Check that alarm is properly displayed.
The radio or iPod alarm is activated but no
sound comes on at the preset alarm time.
iPod nano
 Check the alarm volume setting.
3rd generation
(video)
There is no sound from the iPod.
iPod classic
 Make sure the iPod is securely connected.
 Adjust the VOLUME +.
The iPod cannot be operated with this unit.
 Make sure the iPod is securely connected.
The iPod cannot be charged.
 Make sure the iPod is securely connected.
iPod nano
2nd generation iPod
When daylight saving time begins, the clock
(aluminum) 5th generation
(video)
does not employ the daylight saving time
automatically.
 Make sure the clock is set correctly.
 Press DST/SUMMER TIME to check that the
" " indicator appears.
Specifications
iPod iPod
4th generation 4th generation
(color display)
Time display
12-hour system
Notes
 In these Operating Instructions, "iPod" is used
iPod section
as a general reference to iPod functions on an
DC out: 5 V
iPod or iPhone, unless otherwise specified by
MAX: 500 mA
the text or illustrations.
Radio section
 The connector of the unit is for sole use with an
Frequency range
iPod/iPhone.
 Sony cannot accept responsibility in the event
Band Frequency Channel step
that data recorded to an iPod is lost or damaged
FM 87.5 MHz – 108 MHz 0.1 MHz
when using an iPod connected to this unit.
General
Speaker
Approx. 5 cm (2 inches) dia, cone type, 16 Ω
Power output
0.8 W (at 10 % harmonic distortion)
Power requirements
DC IN 8V () 1 A
For clock back up: 3V DC, one CR2032 battery
Dimensions
Approx. 134.0 mm × 64.0 mm × 124.5 mm (w/h/d)
(5 3 / inches × 2 5 / inches × 5 inches) not
8 8
including projecting parts and controls
Mass
Approx. 410 g (14.5 oz) including power supply
unit
Supplied accessories
AC Power adaptor (1)
Universal dock adaptor for iPhone (1)
Universal dock adaptor for iPhone 3G (1)
Design and specifications are subject to change
without notice.
About the backup Using House Current
(See fig. )
battery
To keep accurate time, this unit contains a Use only the AC power adaptor supplied. Do not
CR2032 battery inside of the unit as a backup use any other AC power adaptor. It may cause a
power source. malfunction.
The battery keeps the clock operating in the event
On the AC power adaptor
of a power interruption.
 Use the supplied AC power adaptor only. The
Knowing when to replace the polarity of the plugs of other manufacturers
may be different. Failure to use the supplied AC
battery
power adaptor may cause the unit to
iPod touch
malfunction.
When the battery becomes weak, "  " appears in
2nd generation
 Do not touch the AC power adaptor with wet
the display.
hands.
If a power interruption occurs while the battery is
 Connect the AC power adaptor to an easily
weak, the current time and alarm will be
accessible AC outlet.
initialized.
Should you notice an abnormality in the AC
Replace the battery with a Sony CR2032 lithium
power adaptor, disconnect it from the AC outlet
battery. Use of another battery may cause a fire or
immediately.
explosion.
Note
iPod touch
If "AM 12:00" flashes in the display when the unit
1st generation
is connected to AC outlet for the first time, the
battery may be weak. In this case, consult your
Sony dealer.

Replacing the battery
1
Keep the AC plug connected to the AC
outlet, remove the screw that secures the
iPhone
battery holder at the bottom of the unit
using a screwdriver, and remove the
battery holder (See fig. -).
2
Replace a new battery in the battery
holder with the  side facing up
AC power adaptor
(See fig. -).
iPod nano (supplied)
1st generation 3
Insert the battery holder back into the
unit and secure it with the screw
(See fig. -).
4
Press iPod & iPhone , SNOOZE/
BRIGHTNESS or FM to turn "  " off in
the display.
iPod mini Note
When you replace the battery, do not disconnect
the AC power adaptor from the unit. Otherwise,
current time, alarm and station presets will be
initialized.



CR2032

DC IN 8V