Raindance Showerhead 28473XX1 Technical Data Flow rate at 45 psi 2.5 gpm Installation: Make sure that the self-sealing filter gasket is installed in the inlet of the showerhead. The filter must be installed to protect against damage from debris. Debris damage is not covered by the Hansgrohe warranty. If using in an existing shower, remove the old showerhead: ·...
Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty.
Limited Lifetime Consumer Warranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
TO OBTAIN WARRANTY SERVICE Contact your Hansgrohe retailer, or write to Technical Service at: Hansgrohe Inc. 1492 Bluegrass Lakes Parkway Alpharetta GA 30004 Or, call Hansgrohe toll-free at (800) 334-0455. In requesting warranty service, you will need to provide The sales receipt or other evidence of the date and place of purchase. A description of the problem.
Page 6
PRODUCT INSTRUCTIONS AND QUESTIONS Upon purchase or prior to installation, please carefully inspect your Hansgrohe product for any damage or visible defect. Prior to installing, always carefully study the enclosed instructions on the proper installation and the care and maintenance of the product.
Need help?
Do you have a question about the Raindance Showerhead 27483 1 Series and is the answer not in the manual?
Questions and answers