Honda CB500F 2023 Owner's Manual
  1. Manuals
  2. Brands
  3. Honda Manuals
  4. Motorcycle
  5. CB500F 2023
  6. Owner's manual
Honda CB500F 2023 Owner's Manual

Honda CB500F 2023 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OW N E R'S
M A N UA L
2023 CB500F

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CB500F 2023 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Honda CB500F 2023

Summary of Contents for Honda CB500F 2023

  • Page 1 OW N E R’S M A N UA L 2023 CB500F...
  • Page 2 This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation.
  • Page 3 Welcome Congratulations on your purchase of a new When service is required, remember that Honda vehicle. Your selection of a Honda your Honda dealer knows your vehicle best. makes you part of a worldwide family of If you have the required mechanical “know- satisfied customers who appreciate Honda's how”...
  • Page 4 A Few Words About Safety DANGER Your safety, and the safety of others, is very important. Operating this vehicle safely is an You WILL be KILLED or SERIOUSLY important responsibility. HURT if you don’t follow instructions. To help you make informed decisions about safety, we have provided operating WARNING procedures and other information on safety...

  • Page 5: Table Of Contents

    Contents Vehicle Safety P. 2 Operation Guide P. 16 Maintenance P. 58 Troubleshooting P. 98 Information P. 110 Specifications P. 136...

  • Page 6: Vehicle Safety

    Vehicle Safety This section contains important information for safe riding of your vehicle. Please read this section carefully. Safety Guidelines ..........P. 3 Safety Labels............P. 7 Safety Precautions..........P. 9 Riding Precautions ..........P. 10 Accessories & Modifications......P. 14 Loading ..............

  • Page 7: Safety Guidelines

    Safety Guidelines Safety Guidelines that you and your passenger are both wearing an approved helmet and protective apparel. Follow these guidelines to enhance your safety: Instruct your passenger on holding onto the Perform all routine and regular inspections seat strap or your waist, leaning with you in ●...

  • Page 8: Ride Defensively

    Safety Guidelines Other riding tips can be found in the You Ride within Your Limits and Your Motorcycle Riding Tips booklet that Never ride beyond your personal abilities or came with your vehicle. faster than conditions warrant. Fatigue and inattention can impair your ability to use good judgment and ride safely.
  • Page 9 Safety Guidelines Keep Your Honda in Safe Condition If You are Involved in a Crash It's important to keep your vehicle properly Personal safety is your first priority. If you or maintained and in safe riding condition. anyone else has been injured, take time to...

  • Page 10: Carbon Monoxide Hazard

    Safety Guidelines WARNING Carbon Monoxide Hazard Exhaust contains poisonous carbon monoxide, a Running the engine of your vehicle colorless, odorless gas. Breathing carbon while in an enclosed or even partially monoxide can cause loss of consciousness and enclosed area can cause a rapid build- may lead to death.

  • Page 11: Safety Labels

    Safety Labels Safety Labels serious injury. Read these labels carefully and don't remove them. Safety and information labels on your vehicle If a label comes off or becomes hard to read, provide important safety information and may contact your dealer for a replacement. warn you of potential hazards that could cause Continued...
  • Page 12 Safety Labels...

  • Page 13: Safety Precautions

    Safety Precautions Safety Precautions Must fit comfortably but securely, with the ● chin strap fastened Ride cautiously and keep your hands on the Face shield with unobstructed field of vision ● ● handlebar and feet on the footpegs. or other approved eye protection Instruct your passenger to keep their hands Look for a DOT (Department of ●...

  • Page 14: Riding Precautions

    Riding Precautions Riding Precautions Boots or Riding Shoes Sturdy boots with non-slip soles and ankle protection Break-in Period Jacket and Pants During the first 300 miles (500 km) of running, follow these guidelines to ensure your vehicle's Protective, highly visible, long-sleeved jacket future reliability and performance.
  • Page 15 Riding Precautions Exercise caution on low traction surfaces. Anti-lock Brake System (ABS) ● The tires slip more easily on such This model is equipped with an Anti-lock Brake surfaces and braking distances are System (ABS) designed to help prevent the longer.
  • Page 16 Riding Precautions Engine Braking Parking Engine braking helps slow your vehicle down Park on a firm, level surface. ● when you release the throttle. For further If you must park on a slight incline or loose ● slowing action, downshift to a lower gear. Use surface, park so that the vehicle cannot engine braking with intermittent use of the move or fall over.
  • Page 17 Riding Precautions Slowly lean the vehicle to the left until its Refueling and Fuel Guidelines weight rests on the side stand. Follow these guidelines to protect the engine, Turn the handlebar fully to the left. fuel system and catalytic converter: Turning the handlebar to the right Use only unleaded gasoline.

  • Page 18: Accessories & Modifications

    We strongly advise that you do not add any seriously hurt or killed. accessories that were not specifically designed or approved for your vehicle by Honda or make Follow all instructions in this owner's modifications to your vehicle from its original manual regarding accessories and design.

  • Page 19: Loading

    Loading Loading WARNING Overloading or improper loading can Carrying extra weight affects your vehicle's ● cause a crash and you can be seriously handling, braking and stability. hurt or killed. Always ride at a safe speed for the load you are carrying.

  • Page 20: Parts Location

    Parts Location Tool kit (P.56) Document bag (P.56) Fuel fill cap (P.54) Front brake fluid reservoir (P.87) Front brake lever (P.96) Throttle grip (P.95) Engine oil fill cap (P.83) Engine oil level inspection window (P.83) Rear brake pedal Brake light switch (P.89) Rear brake fluid reservoir (P.87)
  • Page 21 Clutch lever (P.92) Front seat (P.80) Battery (P.78) Fuse boxes (P.108) Rear seat (P.81) Left side cover (P.82) Main fuse (P.109) Rear suspension spring preload adjuster (P.97) Drive chain (P.91) Coolant reserve tank (P.85) Side stand (P.90) Shift lever (P.53)
  • Page 22 Instruments button button Display Check When the ignition switch is turned to the ON position, an initial animation will show. If any part of these displays does not come on when it should, have your dealer check for problems.
  • Page 23 Tachometer red zone Clock (12-hour or 24-hour display) (excessive engine rpm range) To set the clock: (P.31) Speedometer Gear position indicator The gear position is shown in the gear position indicator. Section B display (P.25) “-” appears when the transmission is not shifted properly.
  • Page 24 Instruments (Continued) Coolant temperature gauge When the coolant is over specified temperature, the segment H flashes. If the segment H flashes while riding: (P.100) If the coolant temperature gauge indicator flashes: (P.104) Fuel gauge Remaining fuel when only 1st (E) segment starts flashing: approximately 0.85 US gal (3.2 L) If the fuel gauge indicator flashes in a repeat pattern or turns off:...
  • Page 25 Section A display Changing the section A display You can select the following: With button, you can switch the section Current fuel mileage A display between the current fuel mileage, ● Average fuel mileage [AVG] average fuel mileage, fuel consumption, ●...
  • Page 26 Instruments (Continued) Also, the average fuel mileage for tripmeter Current fuel mileage A will be displayed when the odometer, Displays the current instant fuel mileage. tripmeter A, numerical tachometer and reserve tripmeter are selected. Display range: 0.0 to 300.0 mile/gal (or L/100 Display range: 0.0 to 300.0 mile/gal (or L/100 km or km/L) km or km/L)
  • Page 27 Fuel consumption Average speed [AVG] Displays the fuel consumption since the Displays the average speed since the selected selected tripmeter was reset. tripmeter was reset. The fuel consumption will be calculated The average speed will be calculated based on based on value displayed on the tripmeter (A value displayed on the tripmeter (A or B) or B) selected.
  • Page 28 Instruments (Continued) When “---” is displayed except for the above- Reserve fuel consumption [RES] mentioned cases, go to your dealer for service. Displays the fuel consumption since the 1st To reset the average speed: (E) segment of the fuel gauge starts flashing. (P.27) When the 1st (E) segment of the fuel gauge starts flashing, the current fuel mileage,...
  • Page 29 Section B display Changing the section B display You can select the following: With button, you can switch the section Odometer [TOTAL] B display between the odometer, tripmeter ● Tripmeter [TRIP A/B] A, tripmeter B, numerical tachometer, and ● Numerical tachometer reserve tripmeter.
  • Page 30 Instruments (Continued) Odometer [TOTAL] Reserve tripmeter [RES] Total distance ridden. Distance ridden since the 1st (E) segment of the fuel gauge starts flashing. When “------” is displayed, go to your dealer When the 1st (E) segment of the fuel gauge for service.
  • Page 31 When they are reset, the display quickly cycles To reset the tripmeter [TRIP A/B], through each indication to show each item has average fuel mileage [AVG], fuel been reset. Then, the display returns to the last consumption, average speed [AVG] selected indication.
  • Page 32 Instruments (Continued) To reset the tripmeter B, average fuel When they are reset, the display quickly mileage B, fuel consumption B, average cycles through each indication to show each speed B and elapsed time B (these are based item has been reset. Then, the display returns on tripmeter B) together, press and hold to the last selected indication.
  • Page 33 Display Setting Setting Mode B Setting Mode A The following items can be changed The following items can be changed sequentially. (P.35) sequentially. • Setting of REV indicator (P.30) • Time format setting RPM setting Interval RPM setting • Clock setting Brightness adjustment •...
  • Page 34 Instruments (Continued) Setting Mode A Ordinary display To finalize selected settings, turn the ignition switch to the OFF position or press the Setting Mode A button until the end of the settings is Time format setting reached. Clock setting If no buttons are pressed for 30 seconds, the Backlight brightness adjustment display will automatically return to the ordinary display and any selected settings...
  • Page 35 1 Time format setting: 2 Clock setting: You can switch the time format between 12 Press button until the desired hour is displayed. hour format or 24 hour format. Press and hold button to advance Turn the ignition switch to the ON position. the hour quickly.
  • Page 36 Instruments (Continued) Press button until the desired minute is 3 Backlight brightness adjustment: displayed. You can adjust the brightness to one of five Press and hold button to advance levels. the minute quickly. Press button. The brightness level is switched. You can adjust the brightness level from five levels.
  • Page 37 4 Activating/deactivating of tripmeter 5 Changing of speed and mileage unit: A, average fuel mileage, fuel Press button to select either “mph” and “mile” or “km/h” and “km”. consumption, average speed and elapsed time automatic reset mode: You can activate or deactivate the automatic reset mode by refueling after the 1st (E) segment of the fuel gauge starts flashing.
  • Page 38 Instruments (Continued) 6 Changing the fuel mileage meter unit: Press button to select “L/100km” or “km/L”. Press button. The fuel mileage meter unit is set, and then the display moves to the ordinary display.
  • Page 39 Setting Mode B Ordinary display To finalize selected settings, turn the ignition switch to the OFF position or press the Setting Mode B button until the end of the settings is Setting of REV indicator reached. RPM setting If no buttons are pressed for 30 seconds, the Interval RPM setting display will automatically return to the ordinary display and any selected settings...
  • Page 40 Instruments (Continued) 1 Setting of REV indicator: To change the setting mode B, turn the ignition switch to the ON position while You can change the setting of the REV pressing button until the initial indicator. animation ends. The display moves to the REV indicator blinks during setting.
  • Page 41 Each time button is pressed, the "REV Tachometer Numerical indicator blinking fastest RPM" setting value tachometer will be increased by one segment (250 r/min (rpm)). When the "REV indicator blinking fastest RPM" setting value exceeds 8,750 r/min (rpm), the "REV indicator blinking fastest RPM"...
  • Page 42 Instruments (Continued) Press button. The "REV indicator Each time button is pressed, the blinking fastest RPM" is set, and then the numbers of the "REV indicator blinking display moves to the setting of "REV interval RPM" advances as follows: 250 r/min indicator blinking interval RPM".
  • Page 43 Press button. The "REV indicator Example: REV indicator blinking fastest blinking interval RPM" is set, and then the RPM: 8,750 r/min (rpm) display moves to the brightness adjustment REV indicator blinking interval of the REV indicator. RPM: 250 r/min (rpm) The REV indicator switches from blinking REV indicator r/min (rpm)
  • Page 44 Instruments (Continued) 2 Changing of tachometer display Conventional Peak hold display display mode: You can change the display mode of the tachometer. Press button to switch the display mode of tachometer. Press button. The currently selected display mode is set, and then the display moves to the ordinary display.
  • Page 45 The peak hold segment keeps to show the maximum engine RPM temporarily. Example: Engine revolutions per minutes 8,750 r/min (rpm) Conventional Peak hold display display Peak Tachometer hold bar segment segment...
  • Page 46 Indicators If one of these indicators does not come on when it should, have your dealer check for problems. Left turn signal indicator Right turn signal indicator...
  • Page 47 REV indicator (P.46) High beam indicator PGM-FI (Programmed Fuel Injection) malfunction indicator lamp (MIL) Comes on briefly when the ignition switch is turned to the ON position. If it comes on while engine is running: (P.101) Neutral indicator Comes on when the transmission is in Neutral. Continued...
  • Page 48 Indicators (Continued)
  • Page 49 Low oil pressure indicator Comes on when the ignition switch is turned to the ON position. ● Goes off when the engine starts. ● If it comes on while engine is running: (P.101) ABS (Anti-lock Brake System) indicator Comes on when the ignition switch is turned to the ON position. ●...
  • Page 50 Indicators (Continued) REV Indicator Comes on briefly when the ignition switch is turned to the ON position. ● Initial setting REV indicator blinking fastest RPM: 8,750 r/min (rpm) REV indicator blinking interval RPM: 250 r/min (rpm) REV indicator r/min (rpm) Blinking 8,250 r/min (rpm) Blinking fast...
  • Page 51 This page intentionally left blank.
  • Page 52 Switches Engine stop switch Should normally remain in the (Run) position. In an emergency, switch to (Stop) position (the starter motor will not operate) to stop the engine. Start button Hazard switch Horn button Switchable when the ignition switch is in the ON position. Turn signal switch Pressing the switch turns the turn signal off.

  • Page 53: Ignition Switch

    Ignition Switch Turns electrical system Switches the electrical system on/off, locks on for starting/riding. the steering. Key can be removed when in the OFF or Turns engine off. LOCK position. LOCK Locks steering. Continued...

  • Page 54: Ignition Key

    Switches (Continued) Steering Lock Locking Turn the handlebar all the way to the left. Lock the steering when parking to help Push the key down, and turn the ignition prevent theft. switch to the LOCK position. A U-shaped wheel lock or similar device is Jiggle the handlebar if the lock is difficult also recommended.

  • Page 55: Starting The Engine

    Starting the Engine Start your engine using the following procedure, Make sure the engine stop switch is in the regardless of whether the engine is cold or warm. (Run) position. Turn the ignition switch to the ON position. Shift the transmission to Neutral ( indicator comes on).
  • Page 56 Starting the Engine (Continued) If the engine does not start: Open the throttle fully and press the start button for 5 seconds. Repeat the normal starting procedure. If the engine starts, open the throttle slightly if idling is unstable. If the engine does not start, wait 10 seconds before trying steps a &...

  • Page 57: Shifting Gears

    Shifting Gears Your vehicle transmission has 6 forward Recommended Shift Points gears in a one-down, five-up shift pattern. Shifting Up From 1st to 2nd 12 mph (20 km/h) From 2nd to 3rd 19 mph (30 km/h) From 3rd to 4th 25 mph (40 km/h) From 4th to 5th 31 mph (50 km/h)
  • Page 58 Refueling Opening the Fuel Fill Cap Level plate Ignition key Open the lock cover, insert the ignition key, and turn it clockwise to open the cap. Closing the Fuel Fill Cap After refueling, push the fuel fill cap closed until it locks. Remove the key and close the lock cover.

  • Page 59: Storage Equipment

    Storage Equipment Helmet Holder WARNING The helmet holders are located underside of Riding with a helmet attached to the the rear seat. holder can interfere with the rear wheel or suspension and could cause a crash Helmet holder in which you can be seriously hurt or killed.
  • Page 60 Storage Equipment (Continued) Tool Kit Document Bag The tool kit is located under the rear seat by The document bag is located underside of the rubber strap. the front seat by the rubber strap. Document bag Tool kit Rubber strap Rubber strap Removing the Front Seat (P.80)

  • Page 61: Luggage Tie-Down Hooks

    Luggage Tie-Down Hook The luggage tie-down hooks are located on the underside of the rear seat. Luggage tie-down hooks Luggage tie-down hooks Never use the tie-down hooks to tow or lift the vehicle. Removing the Rear Seat (P.81)

  • Page 62: Maintenance

    Please read “Importance of Maintenance” and “Maintenance Fundamentals” carefully before attempting any maintenance. Refer to “Specifications” for service data. An optional larger tool kit may be available. Check with your Honda dealer's parts department. Importance of Maintenance ......P. 59 Drive Chain............P. 91 Maintenance Schedule........

  • Page 63: Importance Of Maintenance

    Importance of Maintenance For information about the exhaust emission and Importance of Maintenance noise emission requirements of the U.S. Keeping your vehicle well-maintained is Environmental Protection Agency (EPA), the absolutely essential to your safety and to California Air Resources Board (CARB), and the protect your investment, obtain maximum Environment and Climate Change Canada performance, avoid breakdowns, and reduce air...

  • Page 64: Maintenance Safety

    Importance of Maintenance Follow these guidelines when performing Maintenance Safety maintenance. Always read the maintenance instructions Stop the engine and remove the key. ● before you begin each task and make sure that Place your vehicle on a firm, level surface ●...

  • Page 65: Maintenance Schedule

    Maintenance work should be performed in owner. accordance with Honda's standards and specifications by properly trained and equipped technicians. Your dealer meets all of these requirements. All scheduled maintenance is considered a normal owner operating cost and will be charged to you by your dealer.
  • Page 66 Lubricate mechanically skilled. Replace Procedures are provided in an official Honda Service Clean Manual (2 P. 128). : Technical. In the interest of safety, have your vehicle serviced by your dealer.
  • Page 67 Maintenance Schedule Frequency Items × 1,000 mi Regular Refer to Replace page × 1,000 km 12.8 19.2 25.6 32.0 38.4 Drive Chain Every 600 mi (1,000 km): Brake Fluid 2 Years Brake Pads Wear Brake System Brake Light Switch Headlight Aim –...

  • Page 68: Maintenance Record

    Maintenance Record Distance Odometer Date Performed By: Notes 600 miles (1,000 km) 4,000 miles (6,400 km) 8,000 miles (12,800 km) 12,000 miles (19,200 km) 16,000 miles (25,600 km) 20,000 miles (32,000 km) 24,000 miles (38,400 km) 28,000 miles (44,800 km) 32,000 miles (51,200 km) 36,000 miles (57,600 km) 40,000 miles (64,000 km)

  • Page 69: Maintenance Fundamentals

    Maintenance Fundamentals Check the following items after you get on your Pre-ride Inspection vehicle: To ensure safety, it is your responsibility to Throttle action moves smoothly without ● perform a pre-ride inspection and make sure binding P. 95 that any problem you find is corrected. A pre- Brake lever and pedal operate normally ●...
  • Page 70 Maintenance Fundamentals Also, check the odometer reading against the Periodic Checks Maintenance Schedule and perform all You should also perform other periodic maintenance that is due. P. 61 maintenance checks at least once a month regardless of how often you ride, or more often if you ride frequently.
  • Page 71 Maintenance Fundamentals WARNING Replacing Parts Always use Honda Genuine Parts or their Installing non-Honda parts may make equivalents to ensure reliability and safety. your vehicle unsafe and cause a crash in When ordering colored components, specify which you can be seriously hurt or the model name, color, and code mentioned on killed.
  • Page 72 Maintenance Fundamentals Electrolyte splashes into your mouth: Battery ● Rinse mouth thoroughly with water, and do not Your vehicle has a maintenance-free type battery. swallow. You do not have to check the battery electrolyte WARNING level or add distilled water. Clean the battery terminals if they become dirty or corroded.
  • Page 73 30 days using a charger designed specifically for If the terminals are heavily corroded, clean your Honda, which can be purchased from your and polish the terminals with a wire brush or dealer. Read the information that came with sandpaper.
  • Page 74 P. 108 NOTICE Inspecting and Replacing Fuses Installing non-Honda electrical accessories can Turn the ignition switch to the OFF position to overload the electrical system, discharging the remove and inspect fuses. If a fuse is blown, battery and possibly damaging the system.
  • Page 75 For recommended engine oil, see or “Resource Conserving” on the circular API “Specifications.” P. 137 service symbol. If you use non-Honda engine oil, check the label to make sure that the oil satisfies all of the following standards: JASO T 903 standard : MA ●...
  • Page 76 Also inspect the drive sprocket and driven sprocket. If Wipe up spills immediately and wash thoroughly. either has worn or damaged teeth, have the sprocket replaced by your dealer. Recommended brake fluid: Honda DOT 4 Brake Fluid or equivalent WARNING Normal Worn Damaged Clean filler cap before removing.

  • Page 77: Recommended Coolant

    After cleaning, wipe dry and lubricate with the Recommended Coolant recommended lubricant. Pro Honda HP Coolant is a pre-mixed solution Recommended lubricant: of antifreeze and distilled water. Pro Honda HP Chain Lube or equivalent...
  • Page 78 Maintenance Fundamentals Crankcase Breather Tires (Inspecting/Replacing) Checking the Air Pressure Service more frequently when riding in rain, at Visually inspect your tires and use an air full throttle, or after the vehicle is washed or pressure gauge to measure the air pressure at overturned.
  • Page 79 Maintenance Fundamentals WARNING Inspecting for Abnormal Wear Inspect the tires for Riding on tires that are excessively worn signs of abnormal wear or improperly inflated can cause a crash on the contact surface. in which you can be seriously hurt or killed.
  • Page 80 Always use the size and type of tires speed rating, and load range. recommended in this owner's manual. Have the wheel balanced with Honda ● Genuine balance weights or equivalent after the tire is installed.

  • Page 81: Tire Identification Number (Tin)

    Maintenance Fundamentals Tire Identification Number (TIN) Tire Service Life The tire identification number (TIN) is a group of The service life of your tires is dependent on numbers and letters located on the sidewall of the many factors, including, but not limited to, tire.

  • Page 82: Removing & Installing Body Components

    Removing & Installing Body Components Battery Removal Make sure the ignition switch is in the OFF Rubber strap position. Remove the front seat. P. 80 Unhook the rubber strap from rear side. Disconnect the negative - terminal from the battery. Disconnect the positive + terminal from the battery.

  • Page 83: Clip

    Removing & Installing Body Components Clip Clip Removal Press down on the center pin to release the lock. Pull the clip out of the hole. Center pin Installation Push the bottom of the center pin. Insert the clip into the hole. Press down on the center pin to lock the clip.

  • Page 84: Front Seat

    Removing & Installing Body Components Front Seat Front Seat Removal Pull the rear corners of the front seat up, Mounting bolts then remove the mounting bolts. Pull the front seat back and up. Front seat Installation Insert the tab into the recess. Install and tighten the mounting bolts securely.

  • Page 85: Rear Seat

    Removing & Installing Body Components Rear Seat Rear Seat Removal Move the seat strap forward. Rear seat Insert the ignition key into the seat lock. Ignition key Turn the ignition key clockwise, then pull the rear seat forward and up. Installation Seat lock Insert the tab into the recess.

  • Page 86: Left Side Cover

    Removing & Installing Body Components Left Side Cover Left Side Cover Removal Remove the front seat. P. 80 Grommets Clip Remove the bolt and clip. P. 79 Remove the prongs from the grommets, then remove the left side cover backward by releasing the hooks.

  • Page 87: Checking The Engine Oil

    Engine Oil Checking the Engine Oil Oil fill cap If the engine is cold, idle the engine for 3 to 5 minutes. Turn the ignition switch to the OFF position and wait for 2 to 3 minutes. Place your vehicle in an upright position Oil level inspection window on a firm, level surface.

  • Page 88: Adding Engine Oil

    Engine Oil Adding Engine Oil Adding Engine Oil Securely reinstall the oil fill cap. NOTICE If the engine oil is below or near the lower Overfilling with oil or operating with insufficient level mark, add the recommended engine oil. oil can cause damage to your engine. Do not mix P.

  • Page 89: Checking The Coolant

    Coolant Checking the Coolant Reserve tank Check the coolant level in the reserve tank while the engine is cold. UPPER level mark Place your vehicle on a firm, level surface. Hold your vehicle in an upright position. Check that the coolant level is between LOWER level the UPPER level and LOWER level marks mark...
  • Page 90 Coolant Adding Coolant Remove the reserve tank cap and add Reserve tank cap fluid while monitoring the coolant level. Do not overfill above the UPPER level mark. Make sure no foreign objects enter the reserve tank opening. Securely reinstall the reserve tank cap. WARNING Removing the radiator cap while the engine is hot can cause the coolant to...

  • Page 91: Brakes

    Brakes Checking Brake Fluid If the brake fluid level in either reservoir is below the LOWER level mark or the brake lever and pedal freeplay becomes excessive, Place your vehicle in an upright position inspect the brake pads for wear. on a firm, level surface.

  • Page 92: Inspecting The Brake Pads

    Brakes Inspecting the Brake Pads Inspecting the Brake Pads Inspect the brake pads from in front Front of the brake caliper. Always inspect both left and right Check the condition of the brake pad wear brake calipers. indicators. Inspect the brake pads from the rear The pads need to be replaced if a Rear Front...

  • Page 93: Adjusting The Brake Light Switch

    Brakes Adjusting the Brake Light Switch Adjusting the Brake Light Brake light switch Switch Check the operation of the brake light switch. Hold the brake light switch and turn the adjusting nut in the direction A if the switch operates too late, or turn the nut in the direction B if the switch operates too soon.

  • Page 94: Checking The Side Stand

    Side Stand Checking the Side Stand Sit on the vehicle, shift the transmission to Neutral, and raise the side stand. Start the engine, pull the clutch lever in, and shift the transmission into gear. Lower the side stand all the way. The engine should stop as you lower the side stand.

  • Page 95: Drive Chain

    Drive Chain Inspecting the Drive Chain Slack Drive chain Check the drive chain slack at several points along the chain. If the slack is not constant at all points, some links may be kinked and binding. Have the chain inspected by your dealer. Shift the transmission to Neutral.

  • Page 96: Checking The Clutch

    Clutch Checking the Clutch Check the clutch cable for kinks or signs of wear. If necessary, have it replaced by your Checking the Clutch Lever Freeplay dealer. Lubricate the clutch cable with a Check the clutch lever freeplay. commercially available cable lubricant to Freeplay at the clutch lever: prevent premature wear and corrosion.

  • Page 97: Adjusting The Clutch Lever Free Play

    Clutch Adjusting the Clutch Lever Freeplay Adjusting the Clutch Lever Upper lock nut Freeplay Upper Adjustment Attempt adjustment with the upper clutch cable adjuster first. Loosen the upper lock nut. Turn the upper clutch cable adjuster until the freeplay is 3/8 - 13/16 in (10 - 20 mm). Tighten the upper lock nut and check the Upper clutch cable adjuster freeplay again.
  • Page 98 Clutch Adjusting the Clutch Lever Freeplay Loosen the upper lock nut and turn the Lower lock nut upper clutch cable adjuster all the way in (to provide maximum freeplay). Tighten the upper lock nut. Loosen the lower lock nut. Turn the adjusting nut until the clutch lever freeplay is 3/8 - 13/16 in (10 - 20 mm).

  • Page 99: Throttle

    Throttle Checking the Throttle Adjusting the Throttle Freeplay With the engine off, check that the throttle Slide the cable boot. rotates smoothly from fully closed to fully Loosen the lock nut. open in all steering positions and throttle Turn the adjuster until the freeplay is freeplay is correct.

  • Page 100: Other Adjustments

    Other Adjustments Adjusting the Brake Lever Adjuster Index mark Forward You can adjust the distance between the tip of the brake lever and handle grip. Adjustment method Brake lever Turn the adjuster until the numbers align with the index mark while pushing the lever forward in the desired position.

  • Page 101: Adjusting The Rear Suspension

    Other Adjustments Adjusting the Rear Suspension Adjusting the Rear Suspension Extension bar Adjusting the suspension requires a pin spanner. We recommend that you have your vehicle serviced by your dealer. Spring Preload You can adjust the spring preload by the Adjuster adjuster to suit the load or the road surface.

  • Page 102: Troubleshooting

    Troubleshooting Engine Will Not Start........P. 99 Battery Goes Dead..........P. 106 Overheating (Segment H flashes in coolant Burned-out Light Bulb ........P. 107 temperature gauge) ........P. 100 Blown Fuse............P. 108 Warning Indicators On or Flashing..... P. 101 Low Oil Pressure Indicator ......

  • Page 103: Engine Will Not Start

    Engine Will Not Start Starter Motor Operates But Starter Motor Does Not Engine Does Not Start Operate Check the following items: Check the following items: Check the correct engine starting Check the correct engine starting ● ● sequence. P. 51 sequence.

  • Page 104: Overheating (Segment H Flashes In Coolant Temperature Gauge)

    Overheating (Segment H flashes in coolant temperature gauge) The engine is overheating when the following Check that the radiator fan is operating, occurs: and then turn the ignition switch to the The segment H flashes in the coolant OFF position. ●...

  • Page 105: Warning Indicators On Or Flashing

    Warning Indicators On or Flashing Low Oil Pressure Indicator If the engine oil level goes down rapidly, your vehicle may have a leak or another serious problem. Have your vehicle inspected by If the low oil pressure indicator comes on, your dealer.

  • Page 106: Abs (Anti-Lock Brake System) Indicator

    Warning Indicators On or Flashing ABS (Anti-lock Brake System) Indicator ABS (Anti-lock Brake System) If the ABS indicator stays on, your brakes will continue to work as a conventional system, Indicator but without the anti-locking function. If the indicator operates in one of the The ABS indicator may flash if you turn the following ways, you may have a serious rear wheel while the rear wheel is lifted off...

  • Page 107: Other Warning Indications

    Other Warning Indications Fuel Gauge Failure Indication If the fuel system has an error, the fuel gauge indicators will be displayed as shown in the illustration. If these occurs, see your dealer as soon as possible.

  • Page 108: Coolant Temperature Gauge Failure Indication

    Other Warning Indications Coolant Temperature Gauge Failure Indication Coolant Temperature Gauge Failure Indication If the cooling system has an error, all segments will blink as shown in the illustration. If this occurs, see your dealer as soon as possible.

  • Page 109: Tire Puncture

    Tire Puncture WARNING Repairing a puncture or removing a wheel requires special tools and technical expertise. Riding your vehicle with a temporary We recommend you have this type of service tire repair can be risky. If the temporary performed by your dealer. repair fails, you can crash and be After an emergency repair, always have the seriously injured or killed.

  • Page 110: Electrical Trouble

    Electrical Trouble Battery Goes Dead Do not use an automobile-type battery charger, as these can overheat a motorcycle battery and cause permanent damage. If the Charge the battery using a motorcycle battery does not recover after recharging, battery charger. contact your dealer. Remove the battery from the vehicle before charging.

  • Page 111: Burned-Out Light Bulb

    Electrical Trouble Burned-out Light Bulb Burned-out Light Bulb License Plate Light Bulb Remove the screws, license light cover Follow the procedure below to replace a and license light cover packing. burned-out light bulb. Pull out the bulb without turning. Turn the ignition switch to the OFF or LOCK position.

  • Page 112: Blown Fuse

    Electrical Trouble Blown Fuse Blown Fuse Fuse box cover Fuse box cover Before handling fuses, see “Inspecting and Replacing Fuses.” P. 70 Fuse Box Fuses Remove the front seat. P. 80 Remove the fuse box covers. Spare fuses Pull the fuses out one by one with the fuse puller in the tool kit and check for a blown fuse.

  • Page 113: Wire Connector

    Electrical Trouble Blown Fuse Main Fuse Remove the left side cover. P. 82 Disconnect the wire connector of the Wire connector starter magnetic switch. Pull the main fuse out and check for a Main fuse blown fuse. Always replace a blown fuse with a spare fuse of the same rating.

  • Page 114: Information

    Vehicle Identification Number..... P. 121 Emission Control Systems ......P. 122 Catalytic Converter ......... P. 126 Oxygenated Fuels..........P. 127 Authorized Manuals ........P. 128 Warranty Coverage and Service ....P. 129 Honda Contacts ..........P. 132 Reporting Safety Defects ......P. 134...

  • Page 115: Keys

    Keys Keys Ignition key Key tag Ignition Key This vehicle has two ignition keys and a key tag with a key number and a bar code. Store the spare key and the key tag in a safe location. To make a duplicate key, take the spare key and the key tag to your dealer or a locksmith.

  • Page 116: Instruments, Controls, & Other Features

    Instruments, Controls, & Other Features Instruments, Controls, & Tripmeter Other Features Each tripmeter resets to 0.0 when the trip mileage exceeds 9,999.9. Ignition Switch Document Bag Leaving the ignition switch in the ON position The owner’s manual, registration, and insurance with the engine stopped will drain the battery.
  • Page 117 Instruments, Controls, & Other Features Ignition Cut-off System Assist-slipper Clutch System A banking (lean angle) sensor automatically The assist-slipper clutch system helps to prevent stops the engine and fuel pump if the vehicle the rear tire from locking up when the falls over.

  • Page 118: Caring For Your Vehicle

    After the vehicle dries, lubricate any moving Frequent cleaning and polishing is important to parts. ensure the life of your Honda. A clean vehicle Make sure that no lubricant spills onto makes it easier to spot potential problems. the brakes or tires. Brake discs, pads,...
  • Page 119 Caring for Your Vehicle Washing Precautions Do not direct water at the air cleaner: ● Water in the air cleaner can prevent the Follow these guidelines when washing: engine from starting. Do not use high-pressure washers: ● Do not direct water near the headlight: High-pressure water cleaners can ●...
  • Page 120 Caring for Your Vehicle Aluminum Components Panels Aluminum will corrode from contact with dirt, Follow these guidelines to prevent scratches mud, or road salt. Clean aluminum parts and blemishes: regularly and follow these guidelines to avoid Wash gently using a soft sponge and plenty ●...
  • Page 121 Caring for Your Vehicle If the exhaust pipe and muffler are painted, do Exhaust Pipe and Muffler not use a commercially available abrasive The exhaust pipe and muffler are stainless steel kitchen cleaning compound. Use a neutral but may become stained by mud or dust. detergent to clean the painted surface on the exhaust pipe and muffler.

  • Page 122: Storing Your Vehicle

    Wash your vehicle and wax all painted For more information about storage, ● Canada surfaces (except matte painted surfaces). visit our website at www.honda.ca and look up Coat chrome pieces with rust-inhibiting oil. “Storage Tips” under the “Honda Warranty” in Lubricate the drive chain. P. 72 the Warranty tab for your Model.

  • Page 123: Transporting Your Vehicle

    Transporting Your Vehicle Transporting Your Vehicle If your vehicle needs to be transported, it should be carried on a motorcycle trailer or a flatbed truck or trailer that has a loading ramp or lifting platform and motorcycle tie-down straps. Never try to tow your vehicle with a wheel or wheels on the ground.

  • Page 124: You & The Environment

    You & the Environment You & the Environment Recycle Wastes Put oil and other toxic wastes in approved Owning and riding a vehicle can be enjoyable, containers and take them to a recycling center. but you must do your part to protect the Call your local or state office of public works or environment.

  • Page 125: Vehicle Identification Number

    Vehicle Identification Number Vehicle Identification Number The VIN and engine serial number uniquely identify your vehicle and are required in order to register your vehicle. They may also be required when ordering replacement parts. You should record these numbers and keep them in a safe place.

  • Page 126: Emission Control Systems

    Your vehicle engine emits combustion Compliance with the terms of the byproducts, including carbon monoxide (CO), Distributor's Warranties for Honda Motorcycle oxides of nitrogen (NOx), and hydrocarbons Emission Control Systems is necessary in order (HC). Gasoline evaporation also emits to maintain a valid emissions system warranty.
  • Page 127 Emission Control Systems Ignition Timing Control System Noise Emission Requirements The ignition timing control system adjusts the The EPA requires that vehicles built after ignition timing to reduce the amount of HC, January 1, 1983 comply with applicable noise CO, and NOx produced. emission standards for one year or 3,730 miles (6,000 km) after the time of purchase when Secondary Air Injection System...
  • Page 128 Emission Control Systems Evaporative Emission Control System Fuel Permeation Emission Control The fuel tank, fuel hoses, and fuel vapor charge 50 STATE (meets California) An evaporative emissions control system uses a hoses use fuel permeation control technologies canister filled with charcoal to adsorb fuel vapor to prevent fuel vapor emissions.
  • Page 129 Emission Control Systems Removal of, or puncturing of any part of the Noise Emission Control System ● intake system. TAMPERING WITH THE NOISE CONTROL Lack of proper maintenance. ● SYSTEM IS PROHIBITED: Removing or disabling any emissions ● U. S. federal law prohibits, and Canadian compliance component, or replacing any provincial laws may prohibit, the following acts compliance component with a noncompliant...

  • Page 130: Catalytic Converter

    A defective catalytic converter contributes to air riding and turn off the engine. Have your pollution and can impair your engine's vehicle serviced as soon as possible. performance. A replacement unit must be an original Honda part or equivalent.

  • Page 131: Oxygenated Fuels

    Oxygenated Fuels Oxygenated Fuels If you accidentally fill your fuel tank with an oxygenated fuel containing higher percentages, Some conventional fuels blended with alcohol you may experience performance problems. To or an ether compound are available in some resolve the problem, have your dealer drain the locales to help reduce emissions to meet clean fuel tank and replace with the correct fuel.

  • Page 132: Authorized Manuals

    Authorized Manuals Authorized Manuals These Honda manuals are written for the professional technician. However, if you possess The Service Manual used by your the proper tools, observe the safety standards, authorized dealer is available from your Honda and are mechanically capable, you should find dealer or Helm, Inc.

  • Page 133: Warranty Coverage And Service

    Service vehicle. Coverage Your warranty coverage is not voided if you Your new Honda is covered by the following perform your own maintenance. However, warranties: failures that occur due directly to improper Vehicle Limited Warranty ●...
  • Page 134 Warranty Coverage and Service authorized service provider caused damage to Statement on Warranty Coverage for another part of the vehicle otherwise covered Aftermarket and Recycled Parts under warranty before denying warranty The Magnuson-Moss Warranty Act, 15 U.S.C. s. coverage. Additionally, federal law allows a 2301 et seq., makes it illegal for motor vehicle manufacturer to void a motor vehicle warranty manufacturers to void a motor vehicle warranty...
  • Page 135 If you believe you have a problem with your dealership or their designated representative. vehicle, call the service department of your Honda dealer. Make an appointment for an inspection and diagnosis. You will be asked to authorize that inspection, and your dealer will return the results of the inspection.

  • Page 136: Honda Contacts

    Name, address, and telephone number ● Mailstop: 100-4W-5F Product model, year, and VIN ● Date of purchase ● Dealer name and address ● Telephone: (866) 784-1870 We will likely ask your Honda dealer to respond, or possibly acknowledge your comments Website: https://powersports.honda.com/ directly. contact-us...
  • Page 137 Your Honda Dealer HondaCare Protection Plan to extend almost ® The service department of your Honda dealer all of your warranty coverage. offers trained personnel to perform regular maintenance and unexpected repairs. It has the Your Honda dealer can also supply information...

  • Page 138: Reporting Safety Defects

    Reporting Safety Defects Reporting Safety Defects dealer, or American Honda Motor Co., Inc. If you believe that your vehicle has a To contact NHTSA, you may call the defect which could cause a crash or Vehicle Safety Hotline toll-free at:...
  • Page 139 (French Link:) www.tc.canada.ca/ remedy campaign. However, Transport rappels Canada cannot become involved in individual problems between you, your For more information on reporting safety defects or about motor vehicle dealer, or Honda Canada Inc. safety, go to https://www.tc.gc.ca/roadsafety.

  • Page 140: Specifications

    Specifications Main Components ■ 3.285 Overall length 81.9 in (2,080 mm) 2.105 Overall width 31.5 in (800 mm) 1.600 Gear ratio Overall height 41.7 in (1,060 mm) 1.300 Wheelbase 55.5 in (1,410 mm) 1.150 Minimum ground 1.043 5.7 in (145 mm) clearance Reduction ratio 2.029 / 2.733...
  • Page 141 Standard sprocket resource conserving on the circular API Recommended size Driven sprocket service label, SAE 10W-30, JASO T 903 engine oil standard MA, Pro Honda GN4 4-stroke oil (USA & Canada) or Honda 4-stroke oil, or an equivalent motorcycle oil...
  • Page 142 Specifications Bulbs Fuses ■ ■ Headlight Main fuse 30 A Brake light/Taillight Other fuse 30 A, 15 A, 7.5 A Front turn signal/Position light LED Rear turn signal License plate light 12 V-5 W...
  • Page 143 Information Record Engine No. Color Label & Code Owner's Name Address City/State Phone Dealer's Name Address City/State Phone Service Manager...
  • Page 144 California Proposition 65 Warning WARNING: Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
  • Page 145 31MKPB40 © 2022 Honda Motor Co., Ltd. 00X31-MKP-B400 Printed in the U.S.A. All Rights Reserved...

Table of Contents