Advertisement
Unpacking
Before using the device, check the device model and ensure that the shipped box includes the following
items:
� x
X���
� x
Rubber Plug (medium)
� x
�#-��x�� Phillips machine screw
� x
Handless screw
Product Overview
Infrared LED
Card Reader
Auxiliary Camera
� x
Wiring cover
� x
Rubber Plug (large)
� x
ST�x�� crosshead screw
� x
Allen wrench
Quick Guide
� x
Wall-mounting template
� x
Wall-mounting bracket
� x
�-PIN cable
� x
M�x� crosshead screw
Motion Sensor
Main Camera
Photosensitive
Sensor
Call Button
Speaker
White Light LED
Microphone
X���
� x
Rubber plug (small)
� x
Plastic wall anchor
� x
�-PIN cable
� x
Diode
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Akuvox X910
Summary of Contents for Akuvox X910
- Page 1 X��� Quick Guide Unpacking Before using the device, check the device model and ensure that the shipped box includes the following items: � x � x � x � x X��� Wiring cover Wall-mounting template Rubber plug (small) � x �...
-
Page 2: Before You Start
X��� Quick Guide Before You Start Tools needed (not included in shipped box) · Cat Ethernet Cable · Crosshead Screwdriver · Electric Drill Voltage and Current Specifications · It is suggested that use ��VDC �A/��VDC �A power adapter or PoE+ to power on device. ·... - Page 3 �.Use wet cloth clean device surface softly, and then wipe the surface with dry cloth for cleaning the device. �.If there is abnormal situation of the device, including uncommon sound and smell, please power off the device and contact Akuvox Technical Team immediately. Wiring Interface To protect the device from potential damage caused by over-voltage, it is recommended to wire a diode into the circuit.
-
Page 4: Installation
X��� Quick Guide Installation Step�: Bracket/Box Installation �.Wall Mounting �.� Without embedded box in the wall a.Stick the wall-mounting template on Insert four plastic wall anchors into the holes. the wall, ensuring the opening aligns with the cable outlet on the wall. b.Use a �mm hand drill to drill four screw holes with a depth of ��mm. - Page 5 X��� Quick Guide Step�: Main Unit Installation a.Select the appropriate rubber plug to fix Secure the wiring cover to the back cover with four the cables, and place the selected rubber M�x� crosshead screws. plug in the designated position. b.Connect the Ethernet cable and wires to the corresponding interface (for details, refer to“Wiring Interface”).
-
Page 6: Device Test
�.Akuvox warranty does not cover intentional mechanical damage or destruction caused by improper installation. �.Do not attempt to modify, alternate, maintain, or repair device by yourself. Akuvox warranty does not apply to damages caused by anyone who is not representative of Akuvox or an Akuvox authorized service provider.
Need help?
Do you have a question about the X910 and is the answer not in the manual?
Questions and answers