User Password; Pch-Fw Configuration; Trusted Computing - Asus Samrt3000 V5 Q670 Manual

1. Select the Administrator Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then press <Enter>.
3. From the Create New Password box, key in a new password, then press <Enter>.
4. Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an
administrator password, but press <Enter> when prompted to create/confirm the
password.
3.5.2

User Password

If you have set a user password, you must enter the user password for accessing
the system.
To set a user password:
1. Select the User Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press <Enter>.
3. Confirm the password when prompted.
To change a user password:
1. Select the User Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then press <Enter>.
3. From the Create New Password box, key in a new password, then press <Enter>.
4. Confirm the password when prompted.
To clear a user password:
1. Select the Clear User Password item and press <Enter>.
2. Select Yes from the Warning message window then press <Enter>.
3.5.2

PCH-FW Configuration

TPM Device Selection
Allows you to select TPM device.
[PTT]
[dTPM]
When PTT is disabled, all data saved on it will be lost.
3.5.3

Trusted Computing

Security Device Support
Allows you to enable or disable the BIOS support for security device. O.S. will not
show Security Device. TCG EFI protocol and INT1A interface will not be available.
Configuration options: [Disabled] [Enabled]
3-18
Enables PTT in SkuMgr.
Disables PTT in SkuMgr.
SAMRT3000 V5 Q670