Chipset Configuration - Asus Samrt3000 V5 Q670 Manual
Industrial motherboard
Table of Contents
Power Limit 1
Allows you to configure Power Limit 1 value in milliwatts.
Power Limit 2 Override
Allows you to enable or disable Power Limit 2 Override. If this option is set to
[Disabled], BIOS will program the default values for Power Limit 2.
Configuration options: [Enabled] [Disabled]
The following item appears only when you set Power Limit 2 Override to
[Enabled].
Power Limit 2
Allows you to configure Power Limit 2 value in milliwatts.
Reserve for OS memory
Allows you to set the maximum value of TOLUD. Dynamic assignment would
adjust TOLUD automatically based on the largest MMIO length of the installed
graphic controller. Configuration options: [Dynamic] [0.75GB] [1GB] [1.25GB]
[1.5GB] [1.75GB] [2GB] [2.25GB] [2.5GB]
3.3.2
Chipset Configuration
Allows you to configure the chispet settings.
Primary Display
Allows you to select which of the CPU Graphics/PCIE devices should be the
primary display.
Configuration options: [Auto] [CPU Graphics] [PCIE]
Internal Graphics
Configuration options: [Auto] [Disabled] [Enabled]
[Auto]
[Disabled]
[Enabled]
Audio Controller
Allows you to control detection of the HD-Audio device.
Configuration options: [Enabled] [Disabled]
[Enabled]
[Disabled]
High Precision Timer
Allows you to enable or disable the High Precision Event Timer.
Configuration options: [Disabled] [Enabled]
3-4
Keeps IGFX enabled base on the setup options.
Disables the HDA device.
Enables the HDA device.
Enables the HD Audio Device unconditionally.
Disables the HD Audio Device unconditionally.
SAMRT3000 V5 Q670
Table of Contents
Need help?
Do you have a question about the SAMRT3000 V5 Q670 and is the answer not in the manual?