FUTABA 12Z Series Instruction Manual page 92

BUTTERFLY
This function allows powerful brake operation
by simultaneously raising the left and right
ailerons and lowering the flaps (camber flap,
This setting will allow the ailerons to be raised
while the flaps are simultaneously lowered.
landing configuration by accomplishing the
2. Provide washout at the wing tips to reduce
the tendency to tip stall.
setup screen shown below by pushing the enter
button.
[Return Key]
box and adjust the
mixing rates.
dial to the left and push the enter button.
(For more information, see the description
at the back of this manual.)
press the enter button to call
direction.
operate to the point you want to change and then press
the enter button.
adjustment
92 <Model Menu (Airplane/Glider Functions)>
position to be changed, the reference point is
unexpected operation may be performed.
also be set.
*When servo binding occurs when setting the ailerons and
rudder angle.
*The display screen is an example. The actual
screen depends on the model type.
(Currently selected condition name)
(For a description of the setting method, see the description at
the back of this manual.)
setting
(For a description of the setting method, see
the description at the back of this manual.)
(For a description of the setting
[Cursor Lever]
[Data Input Dial]
PUSH
[Enter Button]
and cut switch setting
method, see the description at
the back of this manual.)