ELE to CAMBER
This function is used when you want to mix the
be increased.
call the setup screen shown below by pushing the
enter button.
[Return Key]
*For a description of the
curve setting method,
see the description at the
back of this manual.
(Ailerons and flaps rate
adjustment screen)
switching
(For more information,
refer to the description at
the back of this manual.)
Setting method
data input dial to the left and push the enter
(For a description of the switch selection method,
see the description at the back of this manual.
90
<Model Menu (Airplane/Glider Functions)>
*The display screen is an example. The actual
screen depends on the model type.
turn the
The adjustment rate and adjustment direction can
be set.
(For a description of the curve setting method, see
the description at the back of this manual.)
(Currently selected condition name)
[Cursor Lever]
[Data Input Dial]
PUSH
[Enter Button]