FUTABA 12Z Series Instruction Manual page 105

MULTI ENGINE
This function lets you adjust the throttle when
using a multi engine airplane with up to 4 engines.
The Throttle Cut function, Idle Down function,
Throttle Hold function, High Trim, and Idle Trim
can be adjusted by throttle channel (THR, THR2,
*Initial setting assigns only one throttle channel (THR).
When using this function, the number of throttle channels
must be assigned beforehand at the Function menu of the
Linkage Menu.
throttle channel. Throttle cut operation is linked to
*The throttle cut position set at this screen is effective.
call the setup screen shown below by pushing the
enter button.
[Return Key]
each engine)
each engine)
(For more information, see the description
at the back of this manual.)
*The idle down offset rate set at this screen is effective.
(carburetor opening angle) for each throttle
position can be changed.
based on the center.
*The number of engines (1~4) assigned
by Function menu in the Linkage Menu
setup screen is displayed.
(Currently selected condition name)
PUSH
<Model Menu (Airplane/Glider Functions)>
[Cursor Lever]
[Data Input Dial]
[Enter Button]
105