Section 1 - Product Overview
1
WPS
2
LAN Port
3
Mode Selector
4
Power Receptor
5
Reset Button
D-Link DAP-1560 User Manual
Hardware Overview
Connections
1
2
Press the WPS button to automatically connect to a WPS-enabled wireless client.
Connect 10/100/1000 Ethernet devices such as computers, switches, and hubs.
Slide to the left for Access Point (AP) Mode or to the right for Bridge mode.
Receptor for the supplied power adapter.
Hold the reset button for at least 6 seconds to reset the device back to the factory default
settings. All the LEDs will turn on for 2 second and then begin the reboot process.
3
4
5
8