System - D-Link DAP-1562 User Manual

Section 3 - Configuration
Save Settings To Use this option to save the current access point
Local Hard Drive:
configuration settings to a file on the hard disk
of the computer you are using. First, click the
Save button. You will then see a file dialog, where
you can select a location and file name for the
settings.
Load Settings From
Use this option to load previously saved access
Local Hard Drive: point configuration settings. First, click the
Browse button to find a previously save file
of configuration settings. Then, click the Load
button to transfer those settings to the access
point.
Restore To Factory This option will restore all configuration settings
Default:
back to the settings that were in effect at the
time the access point was shipped from the
factory. Any settings that have not been saved
will be lost, including any rules that you have
created. If you want to save the current access
point configuration settings, use the Save button
above.
Reboot The Device:
Click to reboot the bridge.
Clear Language
Click to clear the language pack. This will put the
Pack:
web UI back to English.
D-Link DAP-1560 User Manual

System

46