Important Safety Message For Draft Beer Dispensing - Haier HBF205EBSS User Manual

English
Note: If only one keg is to be dispensed you must still complete all the above
steps. Simply leave one keg coupler disconnected in the upright / locked
position. Please make sure that the black shut off valves are on the C02
regulator are in the off position.
When stacking 2 kegs be certain to securely install the included
keg joining bracket with the supplied hardware.
Make sure the hoses are not damaged by the kegs.
Wing Nut
Retainer
Screw
CO
2

Important Safety Message for Draft Beer Dispensing

When CO is used for draft beer dispensing, the system must be adequately
2
protected against excessive pressure build-up. This is accomplished by the
already installed two safety devices with adequate relief capacity in the system.
Safety devices are installed in the following places:
A. On or immediately downstream from the CO
B. On the keg coupler.
11
Fixing Screws
Retainer
El Barril de la cerveza
El Apoyo del barril
regulator.
2
Levante Vertical