Download Print this page

Advertisement

Quick Links

1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify trucking company immediately. Lay out all parts. Remove all cardboard and packaging immediately.
Wet or damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
Left Post (1)
(Part# UZ863C)
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
ASSEMBLY INSTRUCTIONS FOR 25B06 EVOLUTION GOAL
Right Post (1)
(Part# UZ864C)
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
Crossbar (1)
(Part# UZ932)
280"
Back Bottom Bar (1)
(Part# UZ892)
280"
***CAUTION***
2005, Rev. 2017 Kwik Goal Ltd.
Left Base (1)
(Part# UZ890)
Right Base (1)
(Part# UZ891)
NZ219 Rev. 07/31/17

Advertisement

loading
Need help?

Need help?

Do you have a question about the EVOLUTION 25B06 and is the answer not in the manual?

Questions and answers

Summary of Contents for KwikGoal EVOLUTION 25B06

  • Page 1 Any modifications to this or any Kwik Goal product will void any and all warranties. 140 Pacific Drive Quakertown, PA 18951 (P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869 Visit our website @ kwikgoal.com 2005, Rev. 2017 Kwik Goal Ltd. NZ219 Rev. 07/31/17...
  • Page 2 10. Fully disassemble goals for seasonal storage. 140 Pacific Drive Quakertown, PA 18951 (P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869 Visit our website @ kwikgoal.com 1998 rev 2009 Kwik Goal Ltd. NZ219 Rev. 07/31/17...
  • Page 3 Right Backdrop (1) Ground Anchor (4) Backdrop Brace (2) Net Strap (1) Post Brace (2) (Part# UZ967) (Part# UZ953) (Part# 10B4406 Pack of 2) (Part# UZ737) w/hardware (Part# UZ212) Left Backdrop (1) Net (1) Channel Spacer (6) Net Clip (100) (Part# UZ812) (Part# 3B1621) (Part# UZ968)
  • Page 4 3. Attach left post and right post to crossbar using channel spacers and 3/8” x 1-1/2” button head screws. Note direction of decals on crossbar before fastening. Place a 3/8” square nut in each side of the crossbar before inserting channel spacer. Be sure connections are pressed firmly together before tightening button head screws.
  • Page 5 5. Attach left base and right base to back bottom bar using channel spacers and 3/8” x 1-1/2” button head screws. Note direction of decals on back bottom bar before fastening. Be sure connections are pressed firmly together before tightening button head screws. 6.
  • Page 6 7. Lift and insert assembled bases into assembled posts. Fasten using channel spacers, front post braces, 3/8” button head screws and 3/8” square nuts. Be sure connections are pressed firmly together before tightening button head screw. Lift Left Post Back Bottom Bar Left Base Lift Crossbar...
  • Page 7 Remove 3/8” button head screws used to temporarily secure fasteners to bases. Attach each backdrop to goal using 3/8” x 1-1/4” button head screws.. Back Bottom Bar Back Bottom Right Base Left Base 3/8" Square Nut Left Backdrop 3/8" Flat Washer 3/8"...
  • Page 8 9. Attach backstay braces using 3/8” x 7/8” button head screws, 3/8” square nuts and 5/16” x 1” button head screws. Attach eye bolts to right backdrop and left backdrop. Back Bottom Bar Right Backdrop Left Base Right Base 5/16" X 1" Eye Bolt Left Backdrop Left Post Right Backdrop...
  • Page 9 10. Turn goal upright onto its bases. Set goal in desired area and mark ground anchor hole location. 11. Move goal and dig holes a minimum of 24" in diameter and 20" deep. Areas subject to heavy ground frost may go as deep as 36". CAUTION: GOALS MUST BE PROPERLY ANCHORED OR STORED AT ALL TIMES.
  • Page 10 14. The ground anchor and chain leash system supplied is the recommended and the safest method of anchoring your goal. However, counterbalance weight may be used as a temporary anchoring system. A minimum of 240 lbs. must be placed on the back bottom bar for the goal to be stabilized.
  • Page 11 15. After concrete has fully cured, follow test procedures to assure that goal has been anchored properly. ANCHOR TEST 1. Clear all persons from a minimum 50 foot radius surrounding the goal. 2. Verify goal is attached to anchors according to instruction. 3.
  • Page 12 16. Attach net using net clips and clip wrench. Net Clip Clip Wrench Net Clip ***CAUTION*** This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings must be checked to insure they are fully tightened before and after each use of this product.
  • Page 13 Eyebolt Clip Net Strap Go to kwikgoal.com for additional product information. ***CAUTION*** This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings must be checked to insure they are fully tightened before and after each use of this product.