Page 1
FCD-JTLD200 FCD-JTLD245 Group Qingdao Economic and Technological Development District Haier Water Heater Co., Ltd. Haier Garden, Qianwangang Road, Economic Development Zone, Qingdao, P. R. China Website http://www.haier.com Please read this manual before usage Rev. 01 Specific Number 0040501317 Retain it for future reference...
Contents Features Electric circuit diagram Safety precautions Setting environment Before use Packing list Special hints Technical parameters Technical data Dimension diagram Appearance and components Installation instructions Precautions during installation Installation methods Using instructions Precautions during use Using methods Cleaning and maintenance See to the physical product for the appearance, color or pattern.
Features Electric circuit diagram Features 1. Safety It is safe and reliable thanks to quality stainless steel electrical heating elements with overheating protection and over pressure protection of inner tank. 2. Durability PCM color board shell contributes to beauty and durability. High quality and reliability due to 3-layer inner tank enamel technology employed in inner tank production.
Safety precautions Please check Solutions Phenomenon Check if the ammeter and wire diameter are If the water supply system stops supplying in accordance with the rated current of the Check water or the water pressure is too low water heater. Please have them checked by No water outlet If the water outlet is blocked.
Page 5
Safety precautions Cleaning and maintenance Cleaning and maintenance Set the power socket of the water heater Note:Please deal with simple issues by referring to the attached before calling a in a dry position away from water. Never service person. insert or pull the power plug with wet hands to avoid electric shock, injury or Statement:Maintenance or repair work can only be performed by qualified service persons.
Setting environment Setting environment Using method Using method In initial use after installation, it must be fully filled with water before turning on the Do not install it outdoor. Do not install it in a place without power. drainage. In first use, as the inner tank is empty, you must turn on the tap and one of the water outlets.
Installation methods Precautions during use Packing list Special hints Technical parameters Installation methods Packing list Connection and use of the check valve: Connect the check valve with G1/2 connection screw according to the arrow on it. Components Pipe fitting Quantity Electric Relief valve / Check...
Dimension diagram Appearance and components Precautions during installation Installation methods Precautions during installation Dimension diagram Make sure the inlet pressure of the tap water is not less than 0.05MPa. Fig 1 The electrical water heater shall be installed indoors where the ambient temperature is over 0 .