Display Option" Setting - Canon C50Fi - VB Network Camera User Manual

Viewer software user's manual
Hide thumbs Also See for C50Fi - VB Network Camera:
Table of Contents

Advertisement

"Display option" Setting

Use this setting to specify the size of the video displayed at startup. Note that the opening
screen shown at startup is displayed at an image size of 320 × 240.
Select "Setup Properties" from the "View" menu and then select "Display option".
1
Select "Set video display size used at startup".
2
● "Adjust to default image size"
● "Use a display size in list below"
e
Tip
46
Procedure
When you connect to the server, the viewer starts up with the image size matched
to the image size initially sent.
Allows you to select any of 4 sizes: Large, Middle, Small and Minimum.
The image size varies according to the type and settings of the connected
camera server.
NTSC
640 × 480
Large
320 × 240
Middle
160 × 120
Small
80 × 60
Minimum
PAL
768 × 576
384 × 288
192 × 144
96 × 72
Viewer for PC Settings

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vb-c50fiVb-c50i/vb-c50irC50fsi - vb network camera

Table of Contents