Wiring; Installation Checklist - Kenmore 33124 - Power Miser 12 Owner's Manual

Potable water heating only not suitable for space heating
Table of Contents

Advertisement

Installation
Instructions
(cont'd)
Installation
Checklist
• Is the fuse or circuit breaker size correct as shown in the chart
in the "Product
Specifications"
section?
• Are the wires from the circuit
breaker or fuse service to the
water heater's junction
box on the correct wire size (gauge) as
shown in the chart in the "Product
Specifications"
section?
• Is the new temperature-pressure
relief valve properly installed,
and piped to an adequate drain? See
Temperature-Pressure
Relief Valve" section.
• Is the water heater completely
filled with water? See
"Filling
the
Water
Heater"
instructions
in the
"Installation
Instructions" section.
• Will a water leak dama.ge anything?
See "Facts to Consider
About the Location" section.
• Are the cold and hot water lines connected
to the water heater
correctly? See "Water Piping" instructions
in the "Installation
Instrucuons
section.
• Is there adequate
clearance for maintenance
around the water
heater?
• Do you need to call your electric company to check your
wiring?
TEMPERATURE-
PRESSURE
--
RELIEF VALVE
- DISCHARGE
PIPE
(Do not tap or plug)
6"AIR GAP
FLOOR
DRAIN
MODEL RATING
PLATE
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents