Acer Nitro XV272K User Manual page 32

System
Standard
Mode
Game Assistant Input
Gaming Auto Source
Picture Wide Mode
Color Hot Key Assignment
Audio Acer Smart Dial
0SD DOC/CI
System HDMI Black Level
Quick Start Mode
HDMI 2.1
Move Enter Back
Standard
Mode
Game Assistant DFR
Gaming DSC
Picture
Color
Audio
0SD
System
Move Enter
Back
1. Press the Menu Key to open the OSD.
2. Toggle the joystick to the up or down to select System Page from the OSD. Then toggle
to the right to the function you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to choose function.
4. The Picture menu can be used to adjust the Input, Auto Source, Wide Mode, Hot Key
Assignment, DDC/CI, HDMI Black Level, Quick Start Mode, HDMI, DSC.
5. Input: Select the source from HDMI1, HDMI2, DP.
6. Auto Source: The default is "On", which can support auto search for signal source in
order.
-----------------------------------------------------------------------------------------------------------
Note: Surround application must set Auto Source is "Off".
7. Wide Mode: You can select which screen aspect you are using. The options are
Aspect, Full, 1:1 and 21:9.
8. Hot Key Assigment: Select the function of shortcut key 1(Modes, Volume,
Brightness,Gamma, Contrast, Low Blue Light, Over Drive, VRB, DFR)
keys 2 (Modes, Volume, Brightness, Gamma, Contrast, Low Blue Light, Over Drive,
VRB, DFR).
9. Acer Smart Dial: For user define Hot Key 1 ~ 3 functions.
10. DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note:
• DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
• Widget tools must setting the DDC/CI to "On" can to work properly.
11. HDMI Black Level: Select to set HDMI black level.
1920x1080 60 DP On
Resolution Hz Input FreeSync Premium
1920x1080 60 DP On
Resolution Hz Input FreeSync Premium