Yamaha CRW4416E - CRW - CD-RW Drive User Manual page 14

Chapter 2 - Installing the Yamaha CRW4416E Drive
3. Your hands or body may be holding a charge of static elec-
tricity.
Touch a metallic portion of the chassis or power supply to
release any such charge.
4. Remove the front cover of a vacant half-height drive bay.
For details refer to the manual of your computer.
5. Slide the CRW4416E drive into the drive bay from the front.
At this time, be careful not to apply excessive force to the drive itself.
Finger-tighten the four fastening screws, and check that there is enough
room to connect the power supply cable, IDE interface connector, and
AUDIO cables.
8
V O L
O N /
D IS C R E A
D /
W R IT
E