GPS
Manufacturer
Northstar
RayMarine
RayMarine
RayMarine
Simrad
Sitex
Standard
3. Be certain all wire connections are secure and that all open wires are adequately
covered.
#
nOte: to extend the life of the radio, use waterproof tape to seal electrical connections.
If the GPS receiver is correctly connected and it transmits valid data, the display shows GPS
GPS Verification
Data OK. Press
ENT-1W25W
If the GPS does not send coordinates within 30 minutes, an audible alert sounds once and the
display shows Input Position. This message remains until the coordinates are updated.
After 4 hours, the audible alert sounds again if no coordinates are received and the GPS is
connected. After 23.5 hours, the radio deleted the current coordinates and displays Input
See page 16 to manually set the GPS coordinates.
Position.
If the radio is receiving valid GPS data, it will automatically set the clock to your local time
Configuring the GPS
based on the GPS location. You can adjust your local time forward or back one hour if
necessary (for example, if you are close to the border of a time zone); you can also adjust for
Daylight Savings Time.
32 English
UM380_20101221.indd 32
Model Number(s)
All Models
420
520 / 620
RL Series
All Models
Neptune,
Nautilus
CP150 / CP150C
to open the GPS status screen and see detailed GPS data:
06/20 11:00:00
Date
o
Course
208
o
35
40. 610 N
Latitude
o
139
46. 564 E
Longitude
GPS Data: External
Status
GPS NMEA0183
OUTPUT Wire Color
(Connect to GREEN
WIRE on your radio)
Yellow
Yellow
Blue
White
White
Gray
Green
Time
16
30. 0 KT
Ground Wire Color
(connect to BARE
WIRE on your radio)
Black
Brown
Brown
Brown
Brown
Brown
Yellow
Current
channel
Speed
4/13/2011 11:25:18 AM