Dr-D504X Cd-Rom Reader - Pioneer DRM-5004X User Manual

Appendix C

DR-D504X CD-ROM Reader

DIP Switches and Jumper Pins
C
C - 2 TP #120 v .1.0 2/95
Two Dip Switches on the front of the
DR-D504X CD-ROM Reader. These are
used to set Termination. Default is OFF.
Both UP = Termination OFF
Both DOWN = Termination ON.
See Section 4.2.1 C.
1 2 3 4
Six Jumper Pins on the lower circuit board of the DR-D504X
CD-ROM Reader. These pins are numbered from left to right 1-6.
The default is jumpered. See Section 4.2.1B.
Pin Numbers
1- Reserved
2- Test Mode
3- SCSI Mode
4 - Fixed Speed
5- Parity
6- Sector Size
Pioneer DRM-5004X CD-ROM Jukebox User's Guide
5 6
Jumpered OFF
-
-
SCSI 2 SCSI 1
DISABLED ENABLED
ENABLED DISABLED
2048k 512k
Jumpers
ON OFF