Pioneer CLD-V2400 Programmer's Reference Manual page 38

Speed Status
To set the playback speed of the player, press MULTI-SPEED SET ("Up" or "Down" on
the remote control unit). The speed setting will be displayed in the upper right corner
of the monitor on the first display line (display line 0). See the example below in
Figure 2-W. The display in this example indicates the speed of the player in Multi-
Speed will be 1/4 speed. During Multi-Speed playback, audio is muted.
Figure 2-W
Displayed Code
x3
x2
x1
1 / 2
1 / 4
1 / 8
1 / 16
STEP 1
STEP 3
Figure 2-X
CLD-V2600 / 2400 Level I & III User's Manual
CLD-V2600 / 2400 Level I & III • Chapter Two
NOTE: MULTI-SPEED SET is not available on this player
with CLV LaserDiscs or with CDs. If there is a CLV disc
1/4
in the drawer when the MULTI-SPEED SET button is
pressed, the letters CLV appear in the upper right hand
corner of the monitor, and no speed change is set. If
there is a CD in the drawer when the MULTI-SPEED SET
button is pressed, the player does not respond.
The table below shows the speeds as they are
displayed and corresponding speeds. (See Figure 2-X.)
Speed Set
180 / 60 3x normal speed
120 / 60 2x normal speed
normal speed/default *
60 / 60
30 / 60 1/2 x normal speed
15 / 60 1/4 x normal speed
8 / 60 1/8 x normal speed
4 / 60 1/16 time normal speed
2 / 60 1 frame per second
1 / 60 1 frame every 3 seconds
*
Normal /Default Speed is 30 frames per second.
TP 117 v. 2.0 • 12/93
2-17