Removing The Front Usb Card - IBM 4800-741 Hardware Service Manual

Updated July 14, 2008

Removing the front USB card

1. Follow the instructions in "Removing the covers" on page 29.
2. Follow the instructions in "Removing the top plate" on page 32
3. Follow the instructions in "Removing the hard disk drive" on page 36.
4. Disconnect the cable attached to the USB card.
Figure 52. Removing the front USB card
5. Remove the two screws ( A in Figure 52) holding the USB card to the system
6. Lift card and remove it from the front of the unit.
7. To replace card, reverse these procedures.
unit.
A
Chapter 2. Removal and replacement procedures
61