Removing the UPS battery
1. Follow the instructions in "Removing the UPS" on page 56.
Figure 51. Removing the UPS battery
2. Follow the pictorial directions on connecting the battery to the UPS, noting the
60
SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Hardware Service Guide
exceptions (in bold) below:
a. See Figure 51, Picture 1. With the UPS on its side, remove the battery door.
b. See Picture 2. Pull the battery out of the UPS such that you can view the
wiring and plug.
c. Disconnect all plugs to the battery.
d. Properly dispose of the old battery.
e. To install a new battery, reverse these procedures.
Updated July 14, 2008