Removing The Expansion Housing - IBM 4800-741 Hardware Service Manual

Removing the expansion housing

1. Follow the instructions in "Removing the covers" on page 29.
2. Follow the instructions in "Removing the UPS" on page 56.
Figure 49. Position of system unit and expansion housing
3. Place the system unit and the expansion housing in the position shown in
58
SurePOS 700 Series: SurePOS 700-721/741/781, 722/742/782 Hardware Service Guide
Figure 49. This position assists with the removal process as the rubber feet do
not touch the counter.
Updated July 14, 2008